> I tried T38Gateway in following modes: > > PRI -> Cisco AS5350 -> SIP -> OpenPBX -> SpanDSP > ATA -> SIP -> OpenPBX -> SpanDSP
Are you actually using the T38Gateway application? The AS5350 should support T.38 itself (and there's no reason not to use it) and the 2nd setup I assume you are using TxFax/RxFax? > I'm going to setup ZAP hardware at openpbx.org box and test this > issue. > I don't think it should be any different than sending the fax as ulaw over the LAN which is what I am trying to do. When I dial from the IAX to the SIP ATA via T38Gateway I get: WARNING[1094269248] app_t38gateway.c: Bridging frames When I dial from the SIP ATA to the IAX via T38Gateway I get: ERROR[1094003008] app_t38gateway.c: failed to get remote_channel IAX2/isphone-out/13525054732 _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
