Am 30.07.18 um 20:42 schrieb Andreas Färber:
Am 30.07.2018 um 07:33 schrieb Sten Bert:
Here's my result for Leap 15.0 from
http://download.opensuse.org/ports/aarch64/distribution/leap/15.0/appliances/:
xzcat
openSUSE-Leap15.0-ARM-JeOS-efi.aarch64-2018.07.02-Buildlp150.1.1.install.tar.xz
| dd bs=4M of=/dev/sdf iflag=fullblock oflag=direct; sync
.tar.xz != .raw.xz
And that's not a -raspberrypi3 image either.
If you dd the wrong file it can't possibly work. :)
openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz
- booted after activating 1st partition as active, but stopped with "incompatible
licence, Press any key to continue"
Don't understand what exactly you're doing there and where exactly
you're seeing that message.
- with and without extraconfig.txt
If it boots, you don't have to touch extraconfig.txt. You only need that
if ubootconfig.txt with that contents is missing (it was moved from one
file to another and - Murphy's Law - the Tumbleweed image got published
in between).
Cheers,
Andreas
P.S. Please don't top-post.
SUCCESS - SUCCESS - SUCSESS - SUCCESS
Andreas you're so right,
taking the "Raspberry3"-named images worked!
The challenge was to find out the right image for the RPi3B+ among the
plenty of ARM images.
Following results for systematic attempts on 2 Raspberry3 images from
http://download.opensuse.org/ports/aarch64:
Valid for all: arm_control=0x200 is already in config.txt (no
extraconfig.txt necessary)
1) Leap 15.0 JeOS:
openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz.part
- booting to login prompt - wonderful!
2) Leap 15.0 LXQT:
openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz
- "You are in emergency mode. ..."
- Timed out waiting for device dev-disk-by\x2duuid-9982\x2d4ABD.device.
- Dependency failed for /boot/efi.
- Dependency failed for Local File Systems.
- after several attempts - success
I have some trouble in the LXQt DE with "libEGL warning: DRI2: failed to
authenticate" - but I think this sould ba a separate thread.
Alessio,
thanks for your help, but unfortunately I could only get JeOS.
osc getbinaries openSUSE:Factory:ARM:Live X11:X11-raspberrypi3.aarch64
images aarch64
Server returned an error: HTTP Error 404: Not Found
Regards
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
