2018-07-30 21:38 GMT+02:00 Sten Bert <[email protected]>: > > Am 30.07.18 um 20:42 schrieb Andreas Färber: >> >> Am 30.07.2018 um 07:33 schrieb Sten Bert: >>> >>> Here's my result for Leap 15.0 from >>> >>> http://download.opensuse.org/ports/aarch64/distribution/leap/15.0/appliances/: >>> >>> xzcat >>> >>> openSUSE-Leap15.0-ARM-JeOS-efi.aarch64-2018.07.02-Buildlp150.1.1.install.tar.xz >>> | dd bs=4M of=/dev/sdf iflag=fullblock oflag=direct; sync >> >> .tar.xz != .raw.xz >> And that's not a -raspberrypi3 image either. >> >> If you dd the wrong file it can't possibly work. :) >> >>> >>> openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz >>> >>> - booted after activating 1st partition as active, but stopped with >>> "incompatible licence, Press any key to continue" >> >> Don't understand what exactly you're doing there and where exactly >> you're seeing that message. >> >>> - with and without extraconfig.txt >> >> If it boots, you don't have to touch extraconfig.txt. You only need that >> if ubootconfig.txt with that contents is missing (it was moved from one >> file to another and - Murphy's Law - the Tumbleweed image got published >> in between). >> >> Cheers, >> Andreas >> >> P.S. Please don't top-post. > > SUCCESS - SUCCESS - SUCSESS - SUCCESS > > Andreas you're so right, > taking the "Raspberry3"-named images worked! > > The challenge was to find out the right image for the RPi3B+ among the > plenty of ARM images. > Following results for systematic attempts on 2 Raspberry3 images from > http://download.opensuse.org/ports/aarch64: > Valid for all: arm_control=0x200 is already in config.txt (no > extraconfig.txt necessary) > > 1) Leap 15.0 JeOS: > openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz.part > - booting to login prompt - wonderful! > > 2) Leap 15.0 LXQT: > openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz > - "You are in emergency mode. ..." > - Timed out waiting for device dev-disk-by\x2duuid-9982\x2d4ABD.device. > - Dependency failed for /boot/efi. > - Dependency failed for Local File Systems. > > - after several attempts - success > > I have some trouble in the LXQt DE with "libEGL warning: DRI2: failed to > authenticate" - but I think this sould ba a separate thread. > > Alessio, > thanks for your help, but unfortunately I could only get JeOS. > osc getbinaries openSUSE:Factory:ARM:Live X11:X11-raspberrypi3.aarch64 > images aarch64 > Server returned an error: HTTP Error 404: Not Found
My mistake. My explanation was indeed confusing. The first JeOS should stay, only the one defining the image name should change: JeOS:X11-raspberrypi3.aarch64 JeOS:KDE-raspberrypi3.aarch64 JeOS:XFCE-raspberrypi3.aarch64 And so on Sorry about that. Alessio > > Regards > > > -- > To unsubscribe, e-mail: [email protected] > To contact the owner, e-mail: [email protected] > -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
