On Mon 30 Jul 2018 09:38:55 PM CDT, Sten Bert wrote: >Am 30.07.18 um 20:42 schrieb Andreas Färber: >> Am 30.07.2018 um 07:33 schrieb Sten Bert: >>> Here's my result for Leap 15.0 from >>> http://download.opensuse.org/ports/aarch64/distribution/leap/15.0/appliances/: >>> >>> xzcat >>> openSUSE-Leap15.0-ARM-JeOS-efi.aarch64-2018.07.02-Buildlp150.1.1.install.tar.xz >>> | dd bs=4M of=/dev/sdf iflag=fullblock oflag=direct; sync >> .tar.xz != .raw.xz >> And that's not a -raspberrypi3 image either. >> >> If you dd the wrong file it can't possibly work. :) >> >>> openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz >>> >>> - booted after activating 1st partition as active, but stopped with >>> "incompatible licence, Press any key to continue" >> Don't understand what exactly you're doing there and where exactly >> you're seeing that message. >> >>> - with and without extraconfig.txt >> If it boots, you don't have to touch extraconfig.txt. You only need >> that if ubootconfig.txt with that contents is missing (it was moved >> from one file to another and - Murphy's Law - the Tumbleweed image >> got published in between). >> >> Cheers, >> Andreas >> >> P.S. Please don't top-post. >SUCCESS - SUCCESS - SUCSESS - SUCCESS > >Andreas you're so right, >taking the "Raspberry3"-named images worked! > >The challenge was to find out the right image for the RPi3B+ among the >plenty of ARM images. >Following results for systematic attempts on 2 Raspberry3 images from >http://download.opensuse.org/ports/aarch64: >Valid for all: arm_control=0x200 is already in config.txt (no >extraconfig.txt necessary) > >1) Leap 15.0 JeOS: >openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz.part >- booting to login prompt - wonderful! > >2) Leap 15.0 LXQT: >openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz >- "You are in emergency mode. ..." >- Timed out waiting for device dev-disk-by\x2duuid-9982\x2d4ABD.device. >- Dependency failed for /boot/efi. >- Dependency failed for Local File Systems. > >- after several attempts - success > >I have some trouble in the LXQt DE with "libEGL warning: DRI2: failed >to authenticate" - but I think this sould ba a separate thread. > >Alessio, >thanks for your help, but unfortunately I could only get JeOS. >osc getbinaries openSUSE:Factory:ARM:Live X11:X11-raspberrypi3.aarch64 >images aarch64 >Server returned an error: HTTP Error 404: Not Found > >Regards > Hi That's because the prefix is JeOS not X11 ;) <osc getbinaries openSUSE:Factory:ARM:Live JeOS:X11-raspberrypi3.aarch64 images aarch64>
A quick browse on OBS openSUSE:Factory:ARM:Live soon figured that out.... FWIW, you may be interested in this forum thread as well; http://forums.opensuse.org/showthread.php?t=531539 -- Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) SLES 15 | GNOME Shell 3.26.2 | 4.12.14-25.3-default HP 255 G4 Notebook | E2-7110 X4 @ 1.80 GHz | AMD Radeon R3 up 2 days 19:12, 2 users, load average: 0.44, -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
