See $SUBJECT - the Leap 15.0 JeOS image fails to boot.
openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz
dd the .raw to a 16GB micro SD card on a linux desktop computer.
Check the config.txt:
mount /dev/sd_usb3_uSD2 /mnt -r
/mnt/boot/vc/config.txt contains arm_control=0x200
(Ugh, mount point not empty)
mount /dev/sd_usb3_uSD1 /mnt/boot/ -r
/mnt/boot/config.txt contains arm_control=0x200
The last 2 blocks of the micro SD card are zeroes.
Powerup:
Green LED flashes briefly, colourwheel screen shows + disappears,
stuck, with screen showing
Net: No ethernet found.
starting USB...
USB0: Core release: 2.80a
scanning bus 0 for devices...
(After over an hour I gave up; it'd be useless anyway if it took
that long to boot.)
RPi3B+ with USB keyboard + mouse connected, monitor connected, Ethernet
not connected, boot from micro SD card.
This image is about 6 weeks old and doesn't boot. Can that be made to
work? Does anyone know how?
Thanks muchly,
Volker
--
Volker Kuhlmann
http://volker.top.geek.nz/ Please do not CC list postings to me.
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
