On 08/16/2018 10:13 AM, Volker Kuhlmann wrote:
See $SUBJECT - the Leap 15.0 JeOS image fails to boot.openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz dd the .raw to a 16GB micro SD card on a linux desktop computer. Check the config.txt: mount /dev/sd_usb3_uSD2 /mnt -r /mnt/boot/vc/config.txt contains arm_control=0x200 (Ugh, mount point not empty) mount /dev/sd_usb3_uSD1 /mnt/boot/ -r /mnt/boot/config.txt contains arm_control=0x200 The last 2 blocks of the micro SD card are zeroes. Powerup: Green LED flashes briefly, colourwheel screen shows + disappears, stuck, with screen showing Net: No ethernet found. starting USB... USB0: Core release: 2.80a scanning bus 0 for devices... (After over an hour I gave up; it'd be useless anyway if it took that long to boot.)
This sounds like the U-Boot USB stack is unhappy about something on your USB bus. What devices do you have connected via USB to your RPi3? Can you try to unplug all and see how far you get?
Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
