On Thu 16 Aug 2018 01:22:17 PM CDT, Alexander Graf wrote:
>On 08/16/2018 10:13 AM, Volker Kuhlmann wrote:
>> See $SUBJECT - the Leap 15.0 JeOS image fails to boot.
>>
>> openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz
>>
>> dd the .raw to a 16GB micro SD card on a linux desktop computer.
>>
>> Check the config.txt:
>>
>> mount /dev/sd_usb3_uSD2 /mnt -r
>>
>> /mnt/boot/vc/config.txt contains arm_control=0x200
>> (Ugh, mount point not empty)
>>
>> mount /dev/sd_usb3_uSD1 /mnt/boot/ -r
>>
>> /mnt/boot/config.txt contains arm_control=0x200
>>
>> The last 2 blocks of the micro SD card are zeroes.
>>
>> Powerup:
>> Green LED flashes briefly, colourwheel screen shows + disappears,
>> stuck, with screen showing
>> Net: No ethernet found.
>> starting USB...
>> USB0: Core release: 2.80a
>> scanning bus 0 for devices...
>>
>> (After over an hour I gave up; it'd be useless anyway if it
>> took that long to boot.)
>
>This sounds like the U-Boot USB stack is unhappy about something on
>your USB bus. What devices do you have connected via USB to your RPi3?
>Can you try to unplug all and see how far you get?
>
>
>Alex
>
Hi
I have that with my TW JeOS on USB device, at u-boot a usb reset
normally sorts it out...
starting USB...
USB0: scanning bus 0 for devices... usb_new_device: Cannot read
configuration, skipping device 13fe:5500 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
U-Boot> usb reset
resetting USB...
USB0: scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
U-Boot> boot
--
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
SLES 15 | GNOME Shell 3.26.2 | 4.12.14-25.6-default
HP 255 G4 Notebook | E2-7110 X4 @ 1.80 GHz | AMD Radeon R3
up 9 days 9:55, 2 users, load average: 3.45,
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
