Bikram Chatterjee wrote: > (II) LoadModule: "intel" > (II) Loading /usr/lib64/xorg/modules//drivers/intel_drv.so > (II) Module intel: vendor="X.Org Foundation" > compiled for 7.2.0, module version = 2.1.1 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 1.2 <snip> > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ, > 965GM, 965GME/GLE, G33, Q35, Q33 <snip> > (II) intel(0): Supported VESA Video Modes: > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] > (II) intel(0): [EMAIL PROTECTED] (interlaced) > (II) intel(0): [EMAIL PROTECTED] <snip> > (II) intel(0): Printing probed modes for output VGA > (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 > 601 604 631 +hsync +vsync (53.7 kHz) > (II) intel(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 > 864 867 871 897 -hsync +vsync (53.8 kHz) > (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 > 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 > 768 768 776 817 interlace +hsync +vsync (35.5 kHz) > (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 > 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 > 603 607 633 -hsync +vsync (53.7 kHz) > (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 > 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 > 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 > 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 > 483 487 507 -hsync +vsync (42.9 kHz) > (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 > 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 > 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 > 483 486 525 -hsync -vsync (35.0 kHz) > (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 > 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 > 421 423 449 -hsync -vsync (39.4 kHz) > (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 > 412 414 449 -hsync +vsync (31.5 kHz)
>> Section "Modes" >> Identifier "Modes[0]" >> EndSection >> >> >> Section "Screen" >> DefaultDepth 24 >> SubSection "Display" >> Depth 15 >> Modes "1152x864" "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Depth 16 >> Modes "1152x864" "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Depth 24 >> Modes "1152x864" "1024x768" "800x600" >> EndSubSection >> SubSection "Display" >> Depth 8 >> Modes "1152x864" "1024x768" "800x600" >> EndSubSection >> Device "Device[0]" >> Identifier "Screen[0]" >> Monitor "Monitor[0]" >> EndSection >> >> >> Section "Device" >> BoardName "945G" >> BusID "0:2:0" >> Driver "intel" >> Identifier "Device[0]" >> Option "monitor-VGA" "Monitor[0]" >> VendorName "Intel" >> EndSection >> You have an intel card, the driver loads fine, but what resolution are you trying to run? Look at the xorg.0.log output above at the resolutions available. If your resolution isn't there, then you will have to _patch_ one of the modes to the resolution you want using the 815resolution program. 1152x864 isn't listed as a _supported_ mode. -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
