On Tue, Apr 9, 2013 at 6:42 PM, [email protected] <[email protected]>wrote:
> > I put two and two together and figured out that those are the names > from the Ralink reference design, not the datasheet. So based on that > observation.... > Toplink has confirmed this to be the correct pin out. I've ordered 20 boards as samples. 8MB flash/ 32MB RAM / chip antenna. I'll let everyone know how they perform when they get here. > > TopLink RT5350 Function Group > 1 WLAN_LED K1 WLANK_LED_N > 3 LINK1 L1 EPHY1 GPIO23 > 5 LINK3 M1 EPHY3 GPIO25 > 7 SPI_CLK N1 SPI > 9 UART_TX N2 UART-lite > 11 I2SCLK P2 UART RTS_N, GPIO7 > 13 RST_PBC N3 UART RXD > 15 GPIO11 N4 UART DTR_N, GPIO11 > 17 TXOM0 L5 Ethernet > 19 TXOP0 M5 Ethernet > 21 RXIP0 P5 Ethernet > 23 RXiM0 N5 Ethernet > 25 TXOP4 P9 Ethernet > 27 TXOM4 N9 Ethernet > 29 RXIP4 L9 Ethernet > 31 RXIM4 M9 Ethernet > 33 GND > 35 UPHY_PADM N12 USB > 37 UPHY_PADP P12 USB > 39 GND > 41 SDRAM_CS1N C14 SDRAM REFCLK0_OUT > 43 I2C_SCLK B14 I2C > 45 GPIO18 A14 JTAG TDI > 47 WPS_PBC B12 GPIO0 > 49 GPIO17 A15 JTAG TDO > 51 CPURST_N C10 PORST_N > 2 TXD K2 UART TXD > 4 SPI_CS1 L2 SPI > 6 SPI_MISO M2 SPI > 8 SPI_MISI J3 SPI > 10 GPIO12 J4 UART DCD_N > 12 LINK0 K3 EPHY0 GPIO22 > 14 PWR_LED K4 UART CTS_N > 16 SECU_LED L3 UART DSR_N > 18 GND > 20 GND > 22 3.3V > 24 3.3V > 26 GND > 28 GND > 30 3.3V > 32 3.3V > 34 LINK2 L4 EPHY2 GPIO24 > 36 WPS_LED M3 UART RIN > 38 3.3V > 40 UART_RX P3 UART-lite > 42 LINK4 M4 EPHY4 GPIO26 > 44 I2C_SD B13 I2C > 46 GPIO19 A13 JTAG TMS > 48 GPIO20 A12 JTAG TCLK > 50 GPIO21 A11 JTAG TRST_N > 52 1.8V > > Looks like they have exposed all of the important pins. > > -- > Jon Smirl > [email protected] > -- Jon Smirl [email protected]
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
