Well, I managed to hack the Makefile, so now lam 7.1.2 and friends install
through the
wizard, and Step 1 thru 7 run nicely (except the ENV{DISPLAY} problem mentioned
elsewhere)
But, Step 8 Test Cluster Setup
LAM/MPI (via Torque) [FAILED]
Everything else in the top part passed, including
MPICH (via Torque) [PASSED]
PVM (via Torque) [PASSED]
Most of the stuff on the bottom part failed.
Running Installation tests for pvm
[PASS] pvmd-path-ls.apt
[FAIL] envvar-pvm_arch.apt
[FAIL] envvar-prv_root.apt
[FAIL] pvmd-path-which.apt
[PASS] modulecmd-path-ls.apt
[FAIL] pvm-module-list.apt
[FAILDEP] [pvm-module-show.apb]
[FAILDEP] pvm-module-list.apt]
On 23 Mar 2006 at 12:47, Bernard Li wrote:
> Well of course... you are upgrading LAM/MPI _outside_ of OSCAR, meaning
> you need to manually upgrade all the nodes that have the old version of
> LAM/MPI installed as well as the image.
>
> What the Wizard says at this point does not matter. If you are planning
> to deploy a new cluster and want to start from scratch with LAM/MPI
> 7.1.2, then you also need to update the config.xml and change the
> version numbers according.
>
> Cheers,
>
> Bernard
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > John Meskes
> > Sent: Thursday, March 23, 2006 12:35
> > To: [email protected]
> > Subject: RE: [Oscar-devel] LAM/MPI
> >
> > Hi Bernard
> > Yes, all 3 were installed. # rpm -qa|fgrep 7.1.2
> > lam-switcher-modulefile-7.1.2-1
> > lam-oscar-modulefile-7.1.2-1
> > lam-oscar-7.1.2-1
> >
> > When I go to Step 1 Select OSCAR Packages To Install
> > it still says LAM/MPI included OSCAR 7.0.6-3
> > and Step 2's Environment Switcher says lam ("lam-7.0.6")
> >
> > On 23 Mar 2006 at 10:22, Bernard Li wrote:
> >
> > > Hi John:
> > >
> > > The OSCAR LAM/MPI package includes 3 RPMs which came from 2 SRPMs:
> > >
> > >
> > http://svn.oscar.openclustergroup.org/oscar/tmp/jms-lam-7.1.2-
> > update/pac
> > > kages/lam/SRPMS/
> > >
> > > lam-oscar-7.1.2-1.src.rpm
> > > lam-switcher-modulefile-7.1.2-1.src.rpm
> > >
> > > The one you rebuilt (lam-oscar) should provide you with 2 RPMs. You
> > > also need to rebuild and the second SRPM.
> > >
> > > In summary, you should have 3 RPMs installed:
> > >
> > > lam-oscar
> > > lam-oscar-modulefile
> > > lam-switcher-modulefile
> > >
> > > BTW, you shouldn't need to -e and -i, you could have just done -U
> > > (upgrade) in one shot.
> > >
> > > Cheers,
> > >
> > > Bernard
> > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED]
> > > > [mailto:[EMAIL PROTECTED] On Behalf Of
> > > > John Meskes
> > > > Sent: Thursday, March 23, 2006 8:21
> > > > To: [email protected]
> > > > Subject: RE: [Oscar-devel] LAM/MPI
> > > >
> > > > Hi Bernard
> > > > It still seems to think it's 7.0.6 and I'm not that familiar
> > > > with the system to
> > > > know where to tell it otherwise.
> > > > I did rpm -e the 7.0.6 and rpm -i 7.1.2, and switcher
> > mpi=lam-7.1.2
> > > > ...John.
> > > >
> > > > On 22 Mar 2006 at 15:33, Bernard Li wrote:
> > > >
> > > > > Hi John:
> > > > >
> > > > > I've built it, but not really tested it - but it will be
> > > > pretty much the
> > > > > same as the one you built.
> > > > >
> > > > > Did you have problems with the one you built yourself?
> > > > >
> > > > > Cheers,
> > > > >
> > > > > Bernard
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: [EMAIL PROTECTED]
> > > > > > [mailto:[EMAIL PROTECTED] On Behalf Of
> > > > > > John Meskes
> > > > > > Sent: Wednesday, March 22, 2006 14:07
> > > > > > To: [email protected]
> > > > > > Subject: RE: [Oscar-devel] LAM/API
> > > > > >
> > > > > > Hi Bernard
> > > > > > Did you manage to get the LAM/API 7.1.2 tested?
> > > > > > Could I either get a new tar file, or notes on what to change
> > > > > > to get what I
> > > > > > have rebuilt installed?
> > > > > >
> > > > > > On 17 Mar 2006 at 14:09, Bernard Li wrote:
> > > > > >
> > > > > > > Hi John:
> > > > > > >
> > > > > > > I'm rebuilding it right now and will check the RPMs into
> > > > > > trunk as soon
> > > > > > > as I can run some tests.
> > > > > > >
> > > > > > > Cheers,
> > > > > > >
> > > > > > > Bernard
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: [EMAIL PROTECTED]
> > > > > > > > [mailto:[EMAIL PROTECTED]
> > On Behalf Of
> > > > > > > > John Meskes
> > > > > > > > Sent: Friday, March 17, 2006 14:05
> > > > > > > > To: [email protected]
> > > > > > > > Subject: RE: [Oscar-devel] LAM/API
> > > > > > > >
> > > > > > > > On 17 Mar 2006 at 12:28, Bernard Li wrote:
> > > > > > > >
> > > > > > > > > Try rebuilding the following SRPMs for LAM/MPI 7.1.2
> > > > > > and see if they
> > > > > > > > > work for you:
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > http://svn.oscar.openclustergroup.org/svn/oscar/tmp/jms-lam-7.
> > > > > > > > 1.2-update
> > > > > > > > > /packages/lam/SRPMS/
> > > > > > > > >
> > > > > > > > > Note, you need to rebuild them on a system
> > which has TORQUE
> > > > > > > > installed,
> > > > > > > > > otherwise it won't work probably.
> > > > > > > >
> > > > > > > > Hi Bernard
> > > > > > > > Thanks. It built nicely after a little change on
> > line 55 of
> > > > > > > > the .spec file.
> > > > > > > > s/"//g and s/pbss/pbs/
> > > > > > > > ...John.
> >
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Oscar-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-devel
