RE: [Oscar-devel] LAM/MPI

Bernard Li Tue, 28 Mar 2006 00:55:42 -0800

Title: RE: [Oscar-devel] LAM/MPI

Hi John:

I took a careful look at your error message, it seems that it failed to find the "laminfo" command and it erroneously reported that the SSI module was not found - perhaps you can file a bug on this.

I found that there was an error with the original SRPM, (where you won't be able to locate the LAM/MPI binaries) - I have fixed it - try rebuilding with the following SRPM and see if it works better for you:

http://www.bcgsc.ca/downloads/oscar/lam-oscar-7.1.2-3.src.rpm

Please also make sure that you have version 7.1.2 of the lam-switcher-modulefile RPM installed.

If built/installed correctly, the command 'which laminfo' should give back:

/opt/lam-7.1.2/bin/laminfo

Cheers,

Bernard

From: [EMAIL PROTECTED] on behalf of John Meskes
Sent: Mon 27/03/2006 10:32
To: [email protected]
Subject: RE: [Oscar-devel] LAM/MPI

I rebuilt the lam-7.1.2-oscar.spec and lam-switcher-modulefile.spec
using the headnode, and rpm -qa shows several Torque modules installed.
I did a full reinstall, and still have the same [FAILED] results.

On 24 Mar 2006 at 17:25, Bernard Li wrote:

> Did you build the new LAM/MPI on a server with TORQUE installed?
>
> If not, then you will have this issue.
>
> Cheers,
>
> Bernard
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of
> > John Meskes
> > Sent: Friday, March 24, 2006 17:26
> > To: [email protected]
> > Subject: RE: [Oscar-devel] LAM/MPI
> >
> > --- lam/lamtest.err ---
> > /var/spool/pbs/mom_priv/jobs/16.master.SC: line 21: laminfo:
> > command not
> > found
> >
> > ERROR: LAM/MPI does not appear to have the tm boot SSI module!
> > This test script will now abort.
> > ------------
> > but when I run laminfo, I get a full screen of output.
> > And if I run pbs_script.lam manually it gets past that point.
> > I've even copied laminfo into a path'd directory /usr/local/bin
> >
> > On 24 Mar 2006 at 16:15, Bernard Li wrote:
> >
> > > Have you looked at the error logs to see why they all
> > failed? They are
> > > located in /home/oscartst.
> > >
> > > Cheers,
> > >
> > > Bernard
> > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED]
> > > > [mailto:[EMAIL PROTECTED]] On Behalf Of
> > > > John Meskes
> > > > Sent: Friday, March 24, 2006 16:13
> > > > To: [email protected]
> > > > Subject: RE: [Oscar-devel] LAM/MPI
> > > >
> > > > Well, I managed to hack the Makefile, so now lam 7.1.2 and
> > > > friends install through the
> > > > wizard, and Step 1 thru 7 run nicely (except the ENV{DISPLAY}
> > > > problem mentioned
> > > > elsewhere)
> > > > But, Step 8 Test Cluster Setup
> > > > LAM/MPI (via Torque) [FAILED]
> > > > Everything else in the top part passed, including
> > > > MPICH (via Torque) [PASSED]
> > > > PVM (via Torque) [PASSED]
> > > >
> > > > Most of the stuff on the bottom part failed.
> > > > Running Installation tests for pvm
> > > > [PASS] pvmd-path-ls.apt
> > > > [FAIL] envvar-pvm_arch.apt
> > > > [FAIL] envvar-prv_root.apt
> > > > [FAIL] pvmd-path-which.apt
> > > > [PASS] modulecmd-path-ls.apt
> > > > [FAIL] pvm-module-list.apt
> > > > [FAILDEP] [pvm-module-show.apb]
> > > > [FAILDEP] pvm-module-list.apt]
> > > >

-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Oscar-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-devel

RE: [Oscar-devel] LAM/MPI

Reply via email to