Have you looked at the error logs to see why they all failed? They are located in /home/oscartst.
Cheers, Bernard > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > John Meskes > Sent: Friday, March 24, 2006 16:13 > To: [email protected] > Subject: RE: [Oscar-devel] LAM/MPI > > Well, I managed to hack the Makefile, so now lam 7.1.2 and > friends install through the > wizard, and Step 1 thru 7 run nicely (except the ENV{DISPLAY} > problem mentioned > elsewhere) > But, Step 8 Test Cluster Setup > LAM/MPI (via Torque) [FAILED] > Everything else in the top part passed, including > MPICH (via Torque) [PASSED] > PVM (via Torque) [PASSED] > > Most of the stuff on the bottom part failed. > Running Installation tests for pvm > [PASS] pvmd-path-ls.apt > [FAIL] envvar-pvm_arch.apt > [FAIL] envvar-prv_root.apt > [FAIL] pvmd-path-which.apt > [PASS] modulecmd-path-ls.apt > [FAIL] pvm-module-list.apt > [FAILDEP] [pvm-module-show.apb] > [FAILDEP] pvm-module-list.apt] > > On 23 Mar 2006 at 12:47, Bernard Li wrote: > > > Well of course... you are upgrading LAM/MPI _outside_ of > OSCAR, meaning > > you need to manually upgrade all the nodes that have the > old version of > > LAM/MPI installed as well as the image. > > > > What the Wizard says at this point does not matter. If you > are planning > > to deploy a new cluster and want to start from scratch with LAM/MPI > > 7.1.2, then you also need to update the config.xml and change the > > version numbers according. > > > > Cheers, > > > > Bernard > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > John Meskes > > > Sent: Thursday, March 23, 2006 12:35 > > > To: [email protected] > > > Subject: RE: [Oscar-devel] LAM/MPI > > > > > > Hi Bernard > > > Yes, all 3 were installed. # rpm -qa|fgrep 7.1.2 > > > lam-switcher-modulefile-7.1.2-1 > > > lam-oscar-modulefile-7.1.2-1 > > > lam-oscar-7.1.2-1 > > > > > > When I go to Step 1 Select OSCAR Packages To Install > > > it still says LAM/MPI included OSCAR 7.0.6-3 > > > and Step 2's Environment Switcher says lam ("lam-7.0.6") > > > > > > On 23 Mar 2006 at 10:22, Bernard Li wrote: > > > > > > > Hi John: > > > > > > > > The OSCAR LAM/MPI package includes 3 RPMs which came > from 2 SRPMs: > > > > > > > > > > > http://svn.oscar.openclustergroup.org/oscar/tmp/jms-lam-7.1.2- > > > update/pac > > > > kages/lam/SRPMS/ > > > > > > > > lam-oscar-7.1.2-1.src.rpm > > > > lam-switcher-modulefile-7.1.2-1.src.rpm > > > > > > > > The one you rebuilt (lam-oscar) should provide you with > 2 RPMs. You > > > > also need to rebuild and the second SRPM. > > > > > > > > In summary, you should have 3 RPMs installed: > > > > > > > > lam-oscar > > > > lam-oscar-modulefile > > > > lam-switcher-modulefile > > > > > > > > BTW, you shouldn't need to -e and -i, you could have > just done -U > > > > (upgrade) in one shot. > > > > > > > > Cheers, > > > > > > > > Bernard > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > > > John Meskes > > > > > Sent: Thursday, March 23, 2006 8:21 > > > > > To: [email protected] > > > > > Subject: RE: [Oscar-devel] LAM/MPI > > > > > > > > > > Hi Bernard > > > > > It still seems to think it's 7.0.6 and I'm not that familiar > > > > > with the system to > > > > > know where to tell it otherwise. > > > > > I did rpm -e the 7.0.6 and rpm -i 7.1.2, and switcher > > > mpi=lam-7.1.2 > > > > > ...John. > > > > > > > > > > On 22 Mar 2006 at 15:33, Bernard Li wrote: > > > > > > > > > > > Hi John: > > > > > > > > > > > > I've built it, but not really tested it - but it will be > > > > > pretty much the > > > > > > same as the one you built. > > > > > > > > > > > > Did you have problems with the one you built yourself? > > > > > > > > > > > > Cheers, > > > > > > > > > > > > Bernard > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: [EMAIL PROTECTED] > > > > > > > [mailto:[EMAIL PROTECTED] > On Behalf Of > > > > > > > John Meskes > > > > > > > Sent: Wednesday, March 22, 2006 14:07 > > > > > > > To: [email protected] > > > > > > > Subject: RE: [Oscar-devel] LAM/API > > > > > > > > > > > > > > Hi Bernard > > > > > > > Did you manage to get the LAM/API 7.1.2 tested? > > > > > > > Could I either get a new tar file, or notes on > what to change > > > > > > > to get what I > > > > > > > have rebuilt installed? > > > > > > > > > > > > > > On 17 Mar 2006 at 14:09, Bernard Li wrote: > > > > > > > > > > > > > > > Hi John: > > > > > > > > > > > > > > > > I'm rebuilding it right now and will check the > RPMs into > > > > > > > trunk as soon > > > > > > > > as I can run some tests. > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > Bernard > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > From: [EMAIL PROTECTED] > > > > > > > > > [mailto:[EMAIL PROTECTED] > > > On Behalf Of > > > > > > > > > John Meskes > > > > > > > > > Sent: Friday, March 17, 2006 14:05 > > > > > > > > > To: [email protected] > > > > > > > > > Subject: RE: [Oscar-devel] LAM/API > > > > > > > > > > > > > > > > > > On 17 Mar 2006 at 12:28, Bernard Li wrote: > > > > > > > > > > > > > > > > > > > Try rebuilding the following SRPMs for > LAM/MPI 7.1.2 > > > > > > > and see if they > > > > > > > > > > work for you: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://svn.oscar.openclustergroup.org/svn/oscar/tmp/jms-lam-7. > > > > > > > > > 1.2-update > > > > > > > > > > /packages/lam/SRPMS/ > > > > > > > > > > > > > > > > > > > > Note, you need to rebuild them on a system > > > which has TORQUE > > > > > > > > > installed, > > > > > > > > > > otherwise it won't work probably. > > > > > > > > > > > > > > > > > > Hi Bernard > > > > > > > > > Thanks. It built nicely after a little change on > > > line 55 of > > > > > > > > > the .spec file. > > > > > > > > > s/"//g and s/pbss/pbs/ > > > > > > > > > ...John. > > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking > scripting language > that extends applications into web and mobile media. Attend > the live webcast > and join the prime developer group breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&; > dat=121642 > _______________________________________________ > Oscar-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/oscar-devel > ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
