> Ok, I tried the current CVS version under SUSE 10.1 with your exact command > line and it works for me:
It obviously does. What kernel version? Vanilla kernel or SUSE kernel? I tried CVS now. No go, same fault. I am using libusb-0.1.2 (default). I run owserver as root, so I can't see any permission problems. Any ideas are very welcome. Thanks Joran Kvalvaag > [EMAIL PROTECTED]:~/owfs> owserver -u -C -p 3333 --mountpoint=/mnt/1wire > --error_level=9 --foreground > CALL: PARSENAME path=[] > CONNECT: Adapter found: 001/008 > DEFAULT: Opened USB DS9490 adapter at 001/008. > DATA: DS9490_setup_adapter: done (ret=0) > DATA: DS9490_overdrive() > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > DATA: BUS_first: No data will be returned > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=00 00 00 00 00 00 00 00 > DEBUG: Clearing root branch > DATA: DS9490_reset > DATA: DS9490_reset: ok > DEBUG: Transaction send = 0 > DEBUG: Transaction end = 0 > DATA: DS9490_reset > DATA: DS9490_reset: ok > DEBUG: DS9490_next_both SN found: 12 E4 D2 1B 00 00 00 05 > DEBUG: BUS_next return = 0 12 E4 D2 1B 00 00 00 05 > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=00 00 00 00 00 00 00 00 > DATA: DS9490_reset > DATA: DS9490_reset: ok > DEBUG: DS9490_next_both SN found: 12 95 CF 1B 00 00 00 3A > DEBUG: BUS_next return = 0 12 95 CF 1B 00 00 00 3A > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=00 00 00 00 00 00 00 00 > DATA: DS9490_reset > DATA: DS9490_reset: ok > DEBUG: DS9490_next_both SN found: 26 3D 3A 15 00 00 00 46 > DEBUG: BUS_next return = 0 26 3D 3A 15 00 00 00 46 > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=00 00 00 00 00 00 00 00 > DATA: DS9490_reset > DATA: DS9490_reset: ok > DEBUG: DS9490_next_both SN found: 01 86 60 BE 09 00 00 7E > DEBUG: BUS_next return = 0 01 86 60 BE 09 00 00 7E > CONNECT: Good DS1421 tag found for 001/008 > DEFAULT: Set DS9490 001/008 unique id to 01 FFFFFF86 60 FFFFFFBE 09 00 00 7E > DEBUG: main_threadid = 47834928293584 > DEBUG: ServerProcessOut = 1082132800 > DEBUG: OW_Announce: 1 > DEBUG: OW_Announce: end > DEBUG: ServerProcessAccept 3333[1082132800] try lock 0 > DEBUG: ServerProcessAccept 3333[1082132800] locked 0 > DEBUG: Announce: 1 > DEBUG: Announce: 2 > DETAIL: RegisterBack ref=5269872 flags=0 error=0 name=OWFS (1-wire) Server > type=_owserver._tcp. domain=local. > DEBUG: RegisterBack: done > DEBUG: Announce: 3 > DEBUG: Announce: end > > Can you tell what version of libusb you are using? Could there be a problem > with permissions? > > I think Gregg Levine uses Slackware as well. Gregg, have you found any > problems? > > Paul Alfille > >> On 2/8/07, J Kvalvaag <[EMAIL PROTECTED]> wrote: >> > >> >> > >> Hi all, >> > >> >> > >> I am having trouble running owfs version 2.6p0 and 2.6p1 on >> > Slackware-11.0 >> > >> with a stock 2.6.18 kernel. Version 2.5p0 to 2.5p10 runs fine. I am >> > using >> > >> fuse-2.6.3. >> > >> >> > >> Did something change, or am I doing anything wrong? >> > >> >> > >> Below is the output from running owserver with debug: >> > >> >> > >> # ./owserver -u -C -p 3333 --mountpoint /mnt/1wire --error_level 9 >> > >> --foreground >> > >> >> > >> CALL: PARSENAME path=[] >> > >> CONNECT: Adapter found: 4/5 >> > >> DEFAULT: Opened USB DS9490 adapter at 4/5. >> > >> DATA: DS9490_getstatus: error reading ret=-22 >> > >> DATA: DS9490_setup_adapter: getstatus failed ret=-5 >> > >> DEFAULT: Error setting up USB DS9490 adapter at 4/5. >> > >> DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 >> > >> DATA: BUS_first: No data will be returned >> > >> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 >> > 00 >> > >> last >> > >> path=00 00 00 00 00 00 00 00 >> > >> DEBUG: Clearing root branch >> > >> DATA: DS9490_reset >> > >> DATA: BUS_first failed during connect [-1/-1] >> > >> DEBUG: main_threadid = 3084400320 >> > >> DEBUG: ServerProcessOut = 3084397488 >> > >> DEBUG: ServerProcessAccept 3333[3084397488] try lock 0 >> > >> DEBUG: ServerProcessAccept 3333[3084397488] locked 0 >> > >> DEBUG: ServerProcessAccept 3333[3076008880] try lock 0 >> > >> >> > >> Here it hangs until I do a CTRL-C >> > >> >> > >> DEBUG: ServerProcess: break signo=2 >> > >> DEBUG: ow_net.c:ServerProcess() shutdown initiated >> > >> DEBUG: Shutting down 0 of 1 thread -1210569808 >> > >> DEBUG: ow_net.c:ServerProcess() shutdown done >> > >> DEBUG: ow_exit 0 >> > >> CALL: Starting Library cleanup >> > >> CALL: Closing Cache >> > >> CALL: Closing input devices >> > >> DEBUG: FreeIn: busmode=3 >> > >> CALL: Closing outout devices >> > >> CALL: Finished Library cleanup >> > >> >> > >> >> > >> >> > >> Regards >> > >> Joran Kvalvaag >> > >> >> > >> > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier. > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
