Tried on Ubuntu, as well. Success.
Linux ubuntu 2.6.15-27-386 #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006 i686
GNU/Linux
libusb-0.1-4
Perhaps this is a problem with libusb versions?
Paul Alfille
On 2/11/07, J Kvalvaag <[EMAIL PROTECTED]> wrote:
> Ok, I tried the current CVS version under SUSE 10.1 with your exact
command
> line and it works for me:
It obviously does. What kernel version? Vanilla kernel or SUSE kernel?
I tried CVS now. No go, same fault.
I am using libusb-0.1.2 (default).
I run owserver as root, so I can't see any permission problems.
Any ideas are very welcome.
Thanks
Joran Kvalvaag
> [EMAIL PROTECTED]:~/owfs> owserver -u -C -p 3333 --mountpoint=/mnt/1wire
> --error_level=9 --foreground
> CALL: PARSENAME path=[]
> CONNECT: Adapter found: 001/008
> DEFAULT: Opened USB DS9490 adapter at 001/008.
> DATA: DS9490_setup_adapter: done (ret=0)
> DATA: DS9490_overdrive()
> DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00
> DATA: BUS_first: No data will be returned
> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00
last
> path=00 00 00 00 00 00 00 00
> DEBUG: Clearing root branch
> DATA: DS9490_reset
> DATA: DS9490_reset: ok
> DEBUG: Transaction send = 0
> DEBUG: Transaction end = 0
> DATA: DS9490_reset
> DATA: DS9490_reset: ok
> DEBUG: DS9490_next_both SN found: 12 E4 D2 1B 00 00 00 05
> DEBUG: BUS_next return = 0 12 E4 D2 1B 00 00 00 05
> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00
last
> path=00 00 00 00 00 00 00 00
> DATA: DS9490_reset
> DATA: DS9490_reset: ok
> DEBUG: DS9490_next_both SN found: 12 95 CF 1B 00 00 00 3A
> DEBUG: BUS_next return = 0 12 95 CF 1B 00 00 00 3A
> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00
last
> path=00 00 00 00 00 00 00 00
> DATA: DS9490_reset
> DATA: DS9490_reset: ok
> DEBUG: DS9490_next_both SN found: 26 3D 3A 15 00 00 00 46
> DEBUG: BUS_next return = 0 26 3D 3A 15 00 00 00 46
> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00
last
> path=00 00 00 00 00 00 00 00
> DATA: DS9490_reset
> DATA: DS9490_reset: ok
> DEBUG: DS9490_next_both SN found: 01 86 60 BE 09 00 00 7E
> DEBUG: BUS_next return = 0 01 86 60 BE 09 00 00 7E
> CONNECT: Good DS1421 tag found for 001/008
> DEFAULT: Set DS9490 001/008 unique id to 01 FFFFFF86 60 FFFFFFBE 09 00
00 7E
> DEBUG: main_threadid = 47834928293584
> DEBUG: ServerProcessOut = 1082132800
> DEBUG: OW_Announce: 1
> DEBUG: OW_Announce: end
> DEBUG: ServerProcessAccept 3333[1082132800] try lock 0
> DEBUG: ServerProcessAccept 3333[1082132800] locked 0
> DEBUG: Announce: 1
> DEBUG: Announce: 2
> DETAIL: RegisterBack ref=5269872 flags=0 error=0 name=OWFS (1-wire)
Server
> type=_owserver._tcp. domain=local.
> DEBUG: RegisterBack: done
> DEBUG: Announce: 3
> DEBUG: Announce: end
>
> Can you tell what version of libusb you are using? Could there be a
problem
> with permissions?
>
> I think Gregg Levine uses Slackware as well. Gregg, have you found any
> problems?
>
> Paul Alfille
>
>> On 2/8/07, J Kvalvaag <[EMAIL PROTECTED]> wrote:
>> > >>
>> > >> Hi all,
>> > >>
>> > >> I am having trouble running owfs version 2.6p0 and 2.6p1 on
>> > Slackware-11.0
>> > >> with a stock 2.6.18 kernel. Version 2.5p0 to 2.5p10 runs fine. I
am
>> > using
>> > >> fuse-2.6.3.
>> > >>
>> > >> Did something change, or am I doing anything wrong?
>> > >>
>> > >> Below is the output from running owserver with debug:
>> > >>
>> > >> # ./owserver -u -C -p 3333 --mountpoint /mnt/1wire --error_level 9
>> > >> --foreground
>> > >>
>> > >> CALL: PARSENAME path=[]
>> > >> CONNECT: Adapter found: 4/5
>> > >> DEFAULT: Opened USB DS9490 adapter at 4/5.
>> > >> DATA: DS9490_getstatus: error reading ret=-22
>> > >> DATA: DS9490_setup_adapter: getstatus failed ret=-5
>> > >> DEFAULT: Error setting up USB DS9490 adapter at 4/5.
>> > >> DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00
>> > >> DATA: BUS_first: No data will be returned
>> > >> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00
00
>> > 00
>> > >> last
>> > >> path=00 00 00 00 00 00 00 00
>> > >> DEBUG: Clearing root branch
>> > >> DATA: DS9490_reset
>> > >> DATA: BUS_first failed during connect [-1/-1]
>> > >> DEBUG: main_threadid = 3084400320
>> > >> DEBUG: ServerProcessOut = 3084397488
>> > >> DEBUG: ServerProcessAccept 3333[3084397488] try lock 0
>> > >> DEBUG: ServerProcessAccept 3333[3084397488] locked 0
>> > >> DEBUG: ServerProcessAccept 3333[3076008880] try lock 0
>> > >>
>> > >> Here it hangs until I do a CTRL-C
>> > >>
>> > >> DEBUG: ServerProcess: break signo=2
>> > >> DEBUG: ow_net.c:ServerProcess() shutdown initiated
>> > >> DEBUG: Shutting down 0 of 1 thread -1210569808
>> > >> DEBUG: ow_net.c:ServerProcess() shutdown done
>> > >> DEBUG: ow_exit 0
>> > >> CALL: Starting Library cleanup
>> > >> CALL: Closing Cache
>> > >> CALL: Closing input devices
>> > >> DEBUG: FreeIn: busmode=3
>> > >> CALL: Closing outout devices
>> > >> CALL: Finished Library cleanup
>> > >>
>> > >>
>> > >>
>> > >> Regards
>> > >> Joran Kvalvaag
>> > >>
>> >
>>
>
-------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
