> Tried on Ubuntu, as well. Success. > > Linux ubuntu 2.6.15-27-386 #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006 i686 > GNU/Linux
Update. I have tried starting owserver 2.6p1 using three different kernels. kernel 2.6.17.13 from Slackware CD : owserver runs fine. kernel 2.6.18 from Slackware CD : owserver hangs like described below. kernel 2.6.20 from kernel.org : owserver hangs like described below. the test was done on Slackware 11.0. The only change between the tests was the kernel i choosed in lilo. Is there anybody out there using owfs with libusb 0.1.12 and kernel 2.6.18 or 2.6.20? Is there anything else to look out for? Regards Joran Kvalvaag > libusb-0.1-4 > > Perhaps this is a problem with libusb versions? > > Paul Alfille > > On 2/11/07, J Kvalvaag <[EMAIL PROTECTED]> wrote: >> >> > Ok, I tried the current CVS version under SUSE 10.1 with your exact >> command >> > line and it works for me: >> >> It obviously does. What kernel version? Vanilla kernel or SUSE kernel? >> >> I tried CVS now. No go, same fault. >> >> I am using libusb-0.1.2 (default). >> I run owserver as root, so I can't see any permission problems. >> >> Any ideas are very welcome. >> >> >> Thanks >> Joran Kvalvaag >> >> >> >> >> > [EMAIL PROTECTED]:~/owfs> owserver -u -C -p 3333 --mountpoint=/mnt/1wire >> > --error_level=9 --foreground >> > CALL: PARSENAME path=[] >> > CONNECT: Adapter found: 001/008 >> > DEFAULT: Opened USB DS9490 adapter at 001/008. >> > DATA: DS9490_setup_adapter: done (ret=0) >> > DATA: DS9490_overdrive() >> > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 >> > DATA: BUS_first: No data will be returned >> > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 >> last >> > path=00 00 00 00 00 00 00 00 >> > DEBUG: Clearing root branch >> > DATA: DS9490_reset >> > DATA: DS9490_reset: ok >> > DEBUG: Transaction send = 0 >> > DEBUG: Transaction end = 0 >> > DATA: DS9490_reset >> > DATA: DS9490_reset: ok >> > DEBUG: DS9490_next_both SN found: 12 E4 D2 1B 00 00 00 05 >> > DEBUG: BUS_next return = 0 12 E4 D2 1B 00 00 00 05 >> > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 >> last >> > path=00 00 00 00 00 00 00 00 >> > DATA: DS9490_reset >> > DATA: DS9490_reset: ok >> > DEBUG: DS9490_next_both SN found: 12 95 CF 1B 00 00 00 3A >> > DEBUG: BUS_next return = 0 12 95 CF 1B 00 00 00 3A >> > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 >> last >> > path=00 00 00 00 00 00 00 00 >> > DATA: DS9490_reset >> > DATA: DS9490_reset: ok >> > DEBUG: DS9490_next_both SN found: 26 3D 3A 15 00 00 00 46 >> > DEBUG: BUS_next return = 0 26 3D 3A 15 00 00 00 46 >> > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 >> last >> > path=00 00 00 00 00 00 00 00 >> > DATA: DS9490_reset >> > DATA: DS9490_reset: ok >> > DEBUG: DS9490_next_both SN found: 01 86 60 BE 09 00 00 7E >> > DEBUG: BUS_next return = 0 01 86 60 BE 09 00 00 7E >> > CONNECT: Good DS1421 tag found for 001/008 >> > DEFAULT: Set DS9490 001/008 unique id to 01 FFFFFF86 60 FFFFFFBE 09 00 >> 00 7E >> > DEBUG: main_threadid = 47834928293584 >> > DEBUG: ServerProcessOut = 1082132800 >> > DEBUG: OW_Announce: 1 >> > DEBUG: OW_Announce: end >> > DEBUG: ServerProcessAccept 3333[1082132800] try lock 0 >> > DEBUG: ServerProcessAccept 3333[1082132800] locked 0 >> > DEBUG: Announce: 1 >> > DEBUG: Announce: 2 >> > DETAIL: RegisterBack ref=5269872 flags=0 error=0 name=OWFS (1-wire) >> Server >> > type=_owserver._tcp. domain=local. >> > DEBUG: RegisterBack: done >> > DEBUG: Announce: 3 >> > DEBUG: Announce: end >> > >> > Can you tell what version of libusb you are using? Could there be a >> problem >> > with permissions? >> > >> > I think Gregg Levine uses Slackware as well. Gregg, have you found any >> > problems? >> > >> > Paul Alfille >> > >> >> On 2/8/07, J Kvalvaag <[EMAIL PROTECTED]> wrote: >> >> > >> >> >> > >> Hi all, >> >> > >> >> >> > >> I am having trouble running owfs version 2.6p0 and 2.6p1 on >> >> > Slackware-11.0 >> >> > >> with a stock 2.6.18 kernel. Version 2.5p0 to 2.5p10 runs fine. I >> am >> >> > using >> >> > >> fuse-2.6.3. >> >> > >> >> >> > >> Did something change, or am I doing anything wrong? >> >> > >> >> >> > >> Below is the output from running owserver with debug: >> >> > >> >> >> > >> # ./owserver -u -C -p 3333 --mountpoint /mnt/1wire --error_level 9 >> >> > >> --foreground >> >> > >> >> >> > >> CALL: PARSENAME path=[] >> >> > >> CONNECT: Adapter found: 4/5 >> >> > >> DEFAULT: Opened USB DS9490 adapter at 4/5. >> >> > >> DATA: DS9490_getstatus: error reading ret=-22 >> >> > >> DATA: DS9490_setup_adapter: getstatus failed ret=-5 >> >> > >> DEFAULT: Error setting up USB DS9490 adapter at 4/5. >> >> > >> DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 >> >> > >> DATA: BUS_first: No data will be returned >> >> > >> DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 >> 00 >> >> > 00 >> >> > >> last >> >> > >> path=00 00 00 00 00 00 00 00 >> >> > >> DEBUG: Clearing root branch >> >> > >> DATA: DS9490_reset >> >> > >> DATA: BUS_first failed during connect [-1/-1] >> >> > >> DEBUG: main_threadid = 3084400320 >> >> > >> DEBUG: ServerProcessOut = 3084397488 >> >> > >> DEBUG: ServerProcessAccept 3333[3084397488] try lock 0 >> >> > >> DEBUG: ServerProcessAccept 3333[3084397488] locked 0 >> >> > >> DEBUG: ServerProcessAccept 3333[3076008880] try lock 0 >> >> > >> >> >> > >> Here it hangs until I do a CTRL-C >> >> > >> >> >> > >> DEBUG: ServerProcess: break signo=2 >> >> > >> DEBUG: ow_net.c:ServerProcess() shutdown initiated >> >> > >> DEBUG: Shutting down 0 of 1 thread -1210569808 >> >> > >> DEBUG: ow_net.c:ServerProcess() shutdown done >> >> > >> DEBUG: ow_exit 0 >> >> > >> CALL: Starting Library cleanup >> >> > >> CALL: Closing Cache >> >> > >> CALL: Closing input devices >> >> > >> DEBUG: FreeIn: busmode=3 >> >> > >> CALL: Closing outout devices >> >> > >> CALL: Finished Library cleanup >> >> > >> >> >> > >> >> >> > >> >> >> > >> Regards >> >> > >> Joran Kvalvaag >> >> > >> >> >> > >> >> >> > >> ------------------------------------------------------------------------- >> > Using Tomcat but need to do more? Need to support web services, >> security? >> > Get stuff done quickly with pre-integrated technology to make your job >> easier. >> > Download IBM WebSphere Application Server v.1.0.1 based on Apache >> Geronimo >> > >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________ >> > Owfs-developers mailing list >> > Owfs-developers@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/owfs-developers >> > >> >> >> ------------------------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, security? >> Get stuff done quickly with pre-integrated technology to make your job >> easier. >> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> Owfs-developers mailing list >> Owfs-developers@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/owfs-developers >> > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier. > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
