Hi Jason,
> And using snmpwalk from the packetfence server, you can successfully
> contact the switch and receive data?
Yes it was working before. Just don't know why it stopped working even I
re-installed PF.
> Is there any particular reason you're using the port-security method for
> a 2960 as opposed to dot1x or mab? I think it just needs IOS 12.2.46SE
> or greater... The port-security method works, but I've found that
> mab/dot1x using RADIUS deauth works pretty flawlessly.
I am totally new to PF so I just followed the config guide to setup my
device. I used to have a 3560 and it was configured with dot1x mab but
didn't work so I use the 2960 instead. The guide is using port security so
I followed. No particular reason. :)
Regards,
Jacky
On Tue, Jul 16, 2013 at 9:01 PM, Jason Frisvold <[email protected]>wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> forbmsyn wrote:
> > Hi Jason,
> >
> > I modify the setting as you suggested but still not working. I
> > switched the deauthMethod to SNMP, assign two new snmp strings to the
> > swtich. I also changed the SNMP to version 1. Below is the new
> > config.
>
> And using snmpwalk from the packetfence server, you can successfully
> contact the switch and receive data?
>
> > switches.conf [192.168.1.12] mode=production deauthMethod=SNMP
> > type=Cisco::Catalyst_2960
>
> Is there any particular reason you're using the port-security method for
> a 2960 as opposed to dot1x or mab? I think it just needs IOS 12.2.46SE
> or greater... The port-security method works, but I've found that
> mab/dot1x using RADIUS deauth works pretty flawlessly.
>
> > I was making the changes via Web UI. I noticed when I click on the
> > IP address of the switch, packetfence.log gave me some error like
> > this:
> >
> > Jul 16 13:20:09 httpd.admin(0) ERROR: Use of uninitialized value
> > $value in string eq at
> > /usr/share/perl5/vendor_perl/HTML/FormHandler/Widget/Field/Select.pm
> > line 90. (pfappserver::__ANON__)
> >
> >
> > After I modified the setting of the switch, and clicked on save,
> > packetfence.log gave some error like this:
> >
> > Jul 16 13:20:25 httpd.admin(0) INFO: Changes successfully commited
> > (pfappserver::Base::Controller::Crud::Config::_commitChanges) Jul 16
> > 13:20:25 httpd.admin(0) ERROR: Argument "default" isn't numeric in
> > pack at /usr/local/pf/lib/pf/util.pm <http://util.pm> line 456.
> > (pfappserver::__ANON__)
>
> The Inverse folks can better identify these errors. It sounds like
> there was a missing value when you first loaded the switch in the GUI,
> and the second error seems to indicate that you have the word "default"
> in a place where it's expecting a number.
>
> > I guess these might not be the cause of the issue because I can
> > verify the setting from the configure file directly. But why there
> > are error pop up?
> >
> > Regards, Jacky
>
> - --
> - ---------------------------
> Jason 'XenoPhage' Frisvold
> [email protected]
> - ---------------------------
>
> "Any sufficiently advanced magic is indistinguishable from technology."
> - - Niven's Inverse of Clarke's Third Law
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG/MacGPG2 v2.0.19 (Darwin)
> Comment: GPGTools - http://gpgtools.org
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAlHl7NkACgkQ8CjzPZyTUTQEwgCfe0EspLWzP3IaLMQDXR5FEGZ0
> 6ssAoIM1SXhB83XvFGfjoJ6OqXtQGjKr
> =V+NX
> -----END PGP SIGNATURE-----
>
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
