Hi Jason,
It is working now. However I still have the following error from
snmptrapd.log.
2013-07-17|20:38:09|UDP: [192.168.1.12]:65030->[192.168.1.5]|0.0.0.0|BEGIN
TYPE 0 END TYPE BEGIN SUBTYPE 0 END SUBTYPE BEGIN VARIABLEBINDINGS
.1.3.6.1.2.1.1.3.0 = Timeticks: (44871281) 5 days,
4:38:32.81|.1.3.6.1.6.3.1.1.4.1.0 = OID:
.1.3.6.1.4.1.9.9.315.0.0.1|.1.3.6.1.2.1.2.2.1.1.10001 = *Wrong Type (should
be INTEGER)*: Gauge32: 10001|.1.3.6.1.2.1.31.1.1.1.1.10001 = STRING:
FastEthernet0/1|.1.3.6.1.4.1.9.9.315.1.2.1.1.10.10001 = Hex-STRING: DC 0E
A1 8A D4 8F END VARIABLEBINDINGS
Thank you very much for your time.
Regards,
Jacky
On Wed, Jul 17, 2013 at 4:20 PM, forbmsyn <[email protected]> wrote:
> Hi Jason,
>
> > And using snmpwalk from the packetfence server, you can successfully
> > contact the switch and receive data?
> Yes it was working before. Just don't know why it stopped working even I
> re-installed PF.
>
>
>
> > Is there any particular reason you're using the port-security method for
> > a 2960 as opposed to dot1x or mab? I think it just needs IOS 12.2.46SE
> > or greater... The port-security method works, but I've found that
> > mab/dot1x using RADIUS deauth works pretty flawlessly.
>
> I am totally new to PF so I just followed the config guide to setup my
> device. I used to have a 3560 and it was configured with dot1x mab but
> didn't work so I use the 2960 instead. The guide is using port security so
> I followed. No particular reason. :)
>
> Regards,
> Jacky
>
>
>
>
>
> On Tue, Jul 16, 2013 at 9:01 PM, Jason Frisvold <[email protected]>wrote:
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> forbmsyn wrote:
>> > Hi Jason,
>> >
>> > I modify the setting as you suggested but still not working. I
>> > switched the deauthMethod to SNMP, assign two new snmp strings to the
>> > swtich. I also changed the SNMP to version 1. Below is the new
>> > config.
>>
>> And using snmpwalk from the packetfence server, you can successfully
>> contact the switch and receive data?
>>
>> > switches.conf [192.168.1.12] mode=production deauthMethod=SNMP
>> > type=Cisco::Catalyst_2960
>>
>> Is there any particular reason you're using the port-security method for
>> a 2960 as opposed to dot1x or mab? I think it just needs IOS 12.2.46SE
>> or greater... The port-security method works, but I've found that
>> mab/dot1x using RADIUS deauth works pretty flawlessly.
>>
>> > I was making the changes via Web UI. I noticed when I click on the
>> > IP address of the switch, packetfence.log gave me some error like
>> > this:
>> >
>> > Jul 16 13:20:09 httpd.admin(0) ERROR: Use of uninitialized value
>> > $value in string eq at
>> > /usr/share/perl5/vendor_perl/HTML/FormHandler/Widget/Field/Select.pm
>> > line 90. (pfappserver::__ANON__)
>> >
>> >
>> > After I modified the setting of the switch, and clicked on save,
>> > packetfence.log gave some error like this:
>> >
>> > Jul 16 13:20:25 httpd.admin(0) INFO: Changes successfully commited
>> > (pfappserver::Base::Controller::Crud::Config::_commitChanges) Jul 16
>> > 13:20:25 httpd.admin(0) ERROR: Argument "default" isn't numeric in
>> > pack at /usr/local/pf/lib/pf/util.pm <http://util.pm> line 456.
>> > (pfappserver::__ANON__)
>>
>> The Inverse folks can better identify these errors. It sounds like
>> there was a missing value when you first loaded the switch in the GUI,
>> and the second error seems to indicate that you have the word "default"
>> in a place where it's expecting a number.
>>
>> > I guess these might not be the cause of the issue because I can
>> > verify the setting from the configure file directly. But why there
>> > are error pop up?
>> >
>> > Regards, Jacky
>>
>> - --
>> - ---------------------------
>> Jason 'XenoPhage' Frisvold
>> [email protected]
>> - ---------------------------
>>
>> "Any sufficiently advanced magic is indistinguishable from technology."
>> - - Niven's Inverse of Clarke's Third Law
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG/MacGPG2 v2.0.19 (Darwin)
>> Comment: GPGTools - http://gpgtools.org
>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>>
>> iEYEARECAAYFAlHl7NkACgkQ8CjzPZyTUTQEwgCfe0EspLWzP3IaLMQDXR5FEGZ0
>> 6ssAoIM1SXhB83XvFGfjoJ6OqXtQGjKr
>> =V+NX
>> -----END PGP SIGNATURE-----
>>
>>
>> ------------------------------------------------------------------------------
>> See everything from the browser to the database with AppDynamics
>> Get end-to-end visibility with application monitoring from AppDynamics
>> Isolate bottlenecks and diagnose root cause in seconds.
>> Start your free trial of AppDynamics Pro today!
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>> _______________________________________________
>> PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
