While this sounds utterly stupid, did you try reseating your
memory board? Alot of the times, a loose memory board is the
root of the problem.
1) Make sure your data is backed up somewhere.
2) Open up your 3
(take out the four screws on the back, and use the stylus as a
lever to pop the back cover)
3) take a deep breath <g>
4) Completely remove the memory board
5) Put it back in, (slanted and push down, like a PC SIMM)
6) (While probably not necessary,) hard-reset for luck <g>
And the OS3.3 upgrade is worthwhile in any case.
While it eats a little more flash than 3.0, it does seem a heck
of a lot faster, especially in HotSyncing.
Good luck!
====================================================
Stuart Uleman [EMAIL PROTECTED]
http://hanachan.org/
====================================================
In message <[EMAIL PROTECTED]
home.com>
"Re: HELP !! my palm is dead...a virus?"
"Alpal <[EMAIL PROTECTED]>" wrote:
> It sounds like your boot code or memory is fudged. Can you get put your
> >My Palm III does not work, there is no reaction on key-presses or even
