Thank you,
but it does not work, there is no access to debug-mode. If i use instead the
hard-reset, there come only some vertical lines on the screen (like
barcodes). :-((
>It sounds like your boot code or memory is fudged. Can you get put your
>PalmIII in debug mode by holding down the down arrow and paperclip
>reseting? (You should see a little tiny cursor blinking in the top left
>corner of the screen.)
>
>If yes, then you can fix, but you will need to download 3Com's PalmOS 3.3
>upgrade at:
>http://www.palmpilot.com/custsupp/upgrade/
>
>I would:
>a) backup your user files on your computer
>b) put the PalmIII in debug mode and install the new PalmOS
>c) hotsync and restore all your user files to the PDA
>
>I've managed to have my PalmIII die like this for 2 reasons:
>1. The capacitor that holds the 5 minute charge while changing batteries
>was leaking.
>2. There was a short-circuit when the motherboard touched the screen
>electronics. (see http://www.asynccomputing.com/trg/faq/009/index.htm for a
>more detailed description)
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
