Hi Cory,
I just tried "Onboard DIN connector (with NVIDIA 3D ...)" and it's still
not showing 3D stereo.
My system is a Dell Precision workstation come with a Quadro 4000 video
card (No DIN connection). The demo 3D test from Nvidia Control Panel
works fine so I think the driver is loaded correctly.
I just installed the new Paraview 5.2 RC1 and it does the same: No 3D
but flickering.
I also tried other modes and none of them works.
Is there any special setting I need config in ParaView?
Thanks for the help.
Gao
On 2016-10-12 08:51 AM, Cory Quammen wrote:
Hi Gao,
Attached is an image of the relevant NVIDIA Control Panel settings for
our working ParaView stereo display setup. It looks like the main
change from your setup is to change "Stereo - Display Mode" to
"Onboard DIN connector (with NVIDIA 3D ...)".
For your reference, our system runs Windows 10 and has a Quadro M5000
and an ASUS VG248QE 24-inch Full HD display. We did not need the
optional 3-pin DIN connector port that seems almost impossible to buy
anywhere.
HTH,
Cory
On Tue, Oct 11, 2016 at 3:17 PM, Gao <g...@pztop.com
<mailto:g...@pztop.com>> wrote:
Hi all,
I am trying to make the stereo 3D working on Paraview but it
doesn't work. I don't know what is the problem.
I got NVIDIA 3D VISION 2 glasses and set it up on my Windows 10
PC. Installed the driver for the QUADRO 4000 card. Tested with the
Nvidia Control Panel (version 8.1.1030.0) and the I can see the
3D demo through the glasses.
Then I downloaded a sample vtk file from here:
http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3Dtestfiles/vtk/rbc_001.vtk
<http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3Dtestfiles/vtk/rbc_001.vtk>
I changed some setting on Nvidia Control Panel:
Manage 3D setting:
Stereo - Display mode : Generic active stereo (with NVIDIA 3D Vision)
Stereo -Enable: On
Stereo -Swap eyes: Off
Now I run paraview with:
paraview.exe --stereo --stereo-type="Crystal Eyes"
Then I open the vtk file I downloaded. I don't see 3D, and the
image is flickering. But the emitter green light is ON.
Can someone help me to get this 3D display going?
Thanks.
Gao
_______________________________________________
Powered by www.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
<http://www.kitware.com/opensource/opensource.html>
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView <http://paraview.org/Wiki/ParaView>
Search the list archives at:
http://markmail.org/search/?q=ParaView
<http://markmail.org/search/?q=ParaView>
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
<http://public.kitware.com/mailman/listinfo/paraview>
--
Cory Quammen
Staff R&D Engineer
Kitware, Inc.
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview