On Wed, Oct 12, 2016 at 3:59 PM, Gao <[email protected]> wrote: > Hi Gory, > > You are right! I set to 120Hz and the 3D works! > Great! Glad to hear it.
> I didn't pay attention on the refresh rate because the 3D demo works, so I > assumed the monitor is not the problem. It turned out that IS the problem. > > Also, I need to change the 120Hz on both the Quadro card and the monitor > (both default to 60Hz). > > Now I am having a different issue: the display became blurry, although the > 3D works. All the graphic elements are blurry except the 3D object. Not > sure what cause this. > Do you mean blurry, as in the text in the GUI is hard to read, or do you mean darker? I find the monitor to appear darker as half the time the monitor is blocked by the active shutter glasses. > I also noticed on the Windows 10, the monitor is recognized as "Generic > PnP monitor" and use a MS driver. I searched and didn't find a driver for > my Asus VG236H. > Hmm, our Asus monitor is recognized in the control panel. I'm not sure about where you can get a driver for it other than the Asus web site. > Thank you very much. > You are welcome! And thank you for providing another data point that shows ParaView in use with stereo. Thanks, Cory > Gao > > > > On 2016-10-12 11:54 AM, Cory Quammen wrote: > > Gao, > > No, there isn't any setting needed in ParaView beyond the command-line > arguments that you are already providing. > > One important thing, though: Make sure your screen refresh rate is set to > 120 Hz or higher. > > - Cory > > > > On Wed, Oct 12, 2016 at 1:55 PM, Gao <[email protected]> wrote: > >> Hi Cory, >> >> I just tried "Onboard DIN connector (with NVIDIA 3D ...)" and it's still >> not showing 3D stereo. >> >> My system is a Dell Precision workstation come with a Quadro 4000 video >> card (No DIN connection). The demo 3D test from Nvidia Control Panel works >> fine so I think the driver is loaded correctly. >> >> I just installed the new Paraview 5.2 RC1 and it does the same: No 3D but >> flickering. >> >> I also tried other modes and none of them works. >> >> Is there any special setting I need config in ParaView? >> >> Thanks for the help. >> >> Gao >> >> >> >> >> On 2016-10-12 08:51 AM, Cory Quammen wrote: >> >> Hi Gao, >> >> Attached is an image of the relevant NVIDIA Control Panel settings for >> our working ParaView stereo display setup. It looks like the main change >> from your setup is to change "Stereo - Display Mode" to "Onboard DIN >> connector (with NVIDIA 3D ...)". >> >> For your reference, our system runs Windows 10 and has a Quadro M5000 and >> an ASUS VG248QE 24-inch Full HD display. We did not need the optional 3-pin >> DIN connector port that seems almost impossible to buy anywhere. >> >> HTH, >> Cory >> >> On Tue, Oct 11, 2016 at 3:17 PM, Gao <[email protected]> wrote: >> >>> Hi all, >>> >>> I am trying to make the stereo 3D working on Paraview but it doesn't >>> work. I don't know what is the problem. >>> >>> I got NVIDIA 3D VISION 2 glasses and set it up on my Windows 10 PC. >>> Installed the driver for the QUADRO 4000 card. Tested with the Nvidia >>> Control Panel (version 8.1.1030.0) and the I can see the 3D demo through >>> the glasses. >>> >>> Then I downloaded a sample vtk file from here: >>> >>> http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/ >>> Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3 >>> Dtestfiles/vtk/rbc_001.vtk >>> >>> I changed some setting on Nvidia Control Panel: >>> Manage 3D setting: >>> Stereo - Display mode : Generic active stereo (with NVIDIA 3D Vision) >>> Stereo -Enable: On >>> Stereo -Swap eyes: Off >>> >>> Now I run paraview with： >>> paraview.exe --stereo --stereo-type="Crystal Eyes" >>> >>> Then I open the vtk file I downloaded. I don't see 3D, and the image is >>> flickering. But the emitter green light is ON. >>> >>> Can someone help me to get this 3D display going? >>> >>> Thanks. >>> >>> Gao >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Search the list archives at: http://markmail.org/search/?q=ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> >> >> >> -- >> Cory Quammen >> Staff R&D Engineer >> Kitware, Inc. >> >> >> > > > -- > Cory Quammen > Staff R&D Engineer > Kitware, Inc. > > > -- Cory Quammen Staff R&D Engineer Kitware, Inc.
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
