on 12/1/02 12:34 AM, Tim at [EMAIL PROTECTED] wrote: >> >> This worked. System booted. Running 432 MHz w/216 cache @ 54 MHz bus. >> >> Tried 56 MHz but system would not boot. Put back to 55 and restarted.
>> How high can the bus on a 7500 run ? > > I wouldn't push it much more than 55. From experience, that's about the max > safe. > When I used a XLR8 ZIF card in my 7500, I couldn't get the bus to go reliably past about 51 or 52 MHz; much beyond that and I'd get occasional lockups and crashes. Eventually, for the sake of security, I left it at 50 MHz which is what it ran before the G3 upgrade... -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
