On 12/4/02 8:43 PM, "David Klaus" <[EMAIL PROTECTED]> wrote: >> I tried 10X with various bus speeds. The only one that would boot was >> 55MHz. The machine ran long enough for cache profiler to report a cache >> speed of 275MHz then locked up. Currently running 440/220 MHz (8X 55MHz). > > A L2 cache above 250Mhz was a very rare thing. If you want to try > and run 550 MHz, try setting your cache ratio to 3:1 and see what > happens.
This test was only meant to see if the G3 would recognize a 10X multiplier. I never expected the 450 ZIF to run over clocked to 550. I did attempt to lower the cache speed. It would lock the system if enabled at any speed. The system would run for short periods with it disabled but was unstable. Regards, Brian -- -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
