Subject: Re: MULTIPLE SCAN 15 DISPLAY - RED FLICKERS, FUZZY Angus,
Your Red flickering display can most likely be fixed by resoldering the connections on the pc board attached to the crt tube itself. You have to remove the case and unsolder the metal shield on the back of the tube to gain access to the solder side of this board. I have fixed many displays by doing this. Make sure the display is unplugged from the ac power. Dan I recently picked up a multiscan 15 which mostly has a blue cast to it, although occasionally it will temporarily display as it should with all colors as they should be. Do I have the same problem?? ===== Ben Kernan pm6500 32/225/3, Mystic CC and 6 other prePPC machines Dedicated Mac user since'90 __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
