Alan: Try connecting all 3 to the hub ports . Make sure all are in the same workgroup.
Ralph ----- Original Message ----- From: "Alan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 07, 2003 10:57 PM Subject: RE: PCWorks: networking > Ralph, the Primary is connected to the hub with an uplink and the two > clients are connected to two ports. Both clients are in the same > workgroup. > > Alan Priol > > > > > > Alan: > > Are both of the clients in the same workgroup ? > > Are all the 3 connected to the 4 ports or is there a up/link port that > you > > are using for one (primary) ? > > > > > > > > > I have 3 computers networked for file sharing and internet. The 2 > client > > > units connect to the Primary computer through a 4 port HUB. Each > client > > > can see and file share to Primary but cannot see each other. Is this > > > normal because they are on a HUB? If I want to share between these > two, > > > the files must be uploaded to the Primary and then downloaded to the > > > other one. > > > Primary is running Windows 98SE and the clients Windows XP. > > > > > > Alan Priol ===================================================== ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
