Alan, I wish you would explain a little how you have your network set up. You have a peer to peer network so there really isn't a primary and clients. I've never heard of linking a computer to a hub on an uplink port. Are you calling the Win98 machine the primary because it is your internet access point? Where is your internet connection? Are all three computers in the same workgroup? Have you assigned IP address to all or have some sort of DHCP running? Have you shared drives or folders on all the machines?
Ben Moore ----- Original Message ----- From: "Alan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 07, 2003 11:57 PM Subject: RE: PCWorks: networking > Ralph, the Primary is connected to the hub with an uplink and the two > clients are connected to two ports. Both clients are in the same > workgroup. > > Alan Priol > > > > > > Alan: > > Are both of the clients in the same workgroup ? > > Are all the 3 connected to the 4 ports or is there a up/link port that > you > > are using for one (primary) ? > > > > > > > > > I have 3 computers networked for file sharing and internet. The 2 > client > > > units connect to the Primary computer through a 4 port HUB. Each > client > > > can see and file share to Primary but cannot see each other. Is this > > > normal because they are on a HUB? If I want to share between these > two, > > > the files must be uploaded to the Primary and then downloaded to the > > > other one. > > > Primary is running Windows 98SE and the clients Windows XP. > > > > > > Alan Priol ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
