It sounds like you are running the WinXP machine as your internet gateway. There is a setting in Zone Alarm under Firewall. Click on advanced and check "this computer is an ICS/NAT gateway.
Ben Moore -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jo Walker - thehomeoffice Sent: Monday, December 29, 2003 9:31 PM To: PCWorks Subject: PCWorks: Zone Alarm Hi All Happy New Year. I got given Zone Alarm Pro 4.0.1 for christmas. (Now that I am running cable modem i need the firewall service) - was using XP's firewall service but wasnt sure if it was 100% effective - Have loaded Zone Alarm up and things seem to be ok except for two problems. #1 If zone alarm is on then my husbands networked computer wont get any access to the internet or email (hubby is running Win 98 on pent 3 866) #2 If zone alarm is on then i cannot use the publish site to remote host area inside my Net Objects Fusion program (im running Win XP on pent 3 866) - this im not too worried about but it does cause a little stress. Now both computers were set up as trusted sites, and I have allowed Zone alarm to give NOF access. What have I missed? or what do i need to change? Any help greatly appreciated. Cheers Jo Walker thehomeoffice http://www.thehomeoffice.net <http://www.thehomeoffice.net/> ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
