Thanks David,
That solves one of my problems. I set up the roll paper printer. I'm 
all set to go now, but I can't get the printer to stop flashing the 
paper feed light. It thinks there's no paper in it. When I push the 
paper feed button, it tries to run the whole roll through. I've tried 
releasing the bale and then setting it back to the first position. That 
didn't work. I tried pushing the roll paper button on the far left of 
the three buttons. That didn't work. Any thoughts?
Paul
On Dec 2, 2006, at 1:06 AM, David Mann wrote:

> On Dec 2, 2006, at 3:56 PM, Paul Stenquist wrote:
>
>> I'm trying to print on roll paper on an Epson 2200 from Mac OSX 3.9.
>> The on-line manual says to go to page setup and under printer select
>> "Epson 2200- Roll Paper." I don't get this choice. My only option is
>> Epson 2200. Any ideas? I'm trying to print an 88 inch panorama on
>> canvas paper. I managed to get the paper to load. I'm printing a small
>> test print now, but I told the printer it was just a super B sheet. I
>> doubt that it would keep printing past 19 inches. Although I don't
>> know
>> that for sure.
>
> IIRC you have to go through the printer installation process a second
> time, and choose the "roll paper" version.  This will set up the roll
> paper option as if it were another printer, which you then choose
> when printing to roll paper.
>
> When printing, just set up a custom paper size with the width of the
> roll and the length of your print plus a small margin for handling.
> I set the margins to zero and manage everything from Photoshop.
> Don't be tempted to use the borderless driver with this, as it screws
> up the resulting print dimensions.
>
> I'm not sure how well an 88 inch print will go... there was a maximum
> length limit (44"?) but that may have been removed in a more recent
> driver version.
>
> - Dave
>
>
> -- 
> PDML Pentax-Discuss Mail List
> PDML@pdml.net
> http://pdml.net/mailman/listinfo/pdml_pdml.net
>


-- 
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net

Reply via email to