ohhh! ah well, sorry...
> -----Original Message-----
> From: Bruce Dayton [mailto:[EMAIL PROTECTED]]
> Sent: 26 June 2002 16:52
> To: Rob Brigham
> Subject: Re[2]: Fill flash
>
>
> Rob,
>
> This only works with P-TTL on the MZ-S. Unless the 645NII supports
> P-TTL, he is stuck doing more along the lines of what I suggested. I
> have the MZ-S and the 67II. On the MZ-S, it is so quick and easy as
> you suggested. On the 67II, to be able to control the flash output,
> you have to use Auto mode and dial in the f-stop that you want. It
> does work well, just slower to do because you have to change it each
> time you change your f-stop on the camera.
>
>
> Bruce
>
>
>
> Wednesday, June 26, 2002, 8:15:38 AM, you wrote:
>
> RB> Press the 'S' button in the middle of the spin dial on
> the flash. You
> RB> should get a flashing '0.0' on the display. spi the dial to set
> RB> exposure compensation on the flash. The amount of fill
> you want may
> RB> vary, but try -2.0 for starters?
>
> >> -----Original Message-----
> >> From: Stephen Hoffman [mailto:[EMAIL PROTECTED]]
> >> Sent: 26 June 2002 15:53
> >> To: [EMAIL PROTECTED]
> >> Subject: Fill flash
> >>
> >>
> >> I have an AF 360 FGZ but I am new to the idea of dedicated
> >> flash. I will be
> >> using the flash unit on a 645NII. When using the flash unit
> >> for fill on a
> >> sunny day, is there a way to control how much flash is put
> >> out? Are there
> >> any general rules about what settings to use for fill flash?
> >> Thanks in
> >> advance.
> >>
> >> Stephen Hoffman
> >> -
> >> This message is from the Pentax-Discuss Mail List. To unsubscribe,
> >> go to http://www.pdml.net and follow the directions. Don't
> forget to
> >> visit the Pentax Users' Gallery at http://pug.komkon.org .
> RB> -
> RB> This message is from the Pentax-Discuss Mail List. To
> unsubscribe,
> RB> go to http://www.pdml.net and follow the directions.
> Don't forget to
> RB> visit the Pentax Users' Gallery at http://pug.komkon.org .
> -
> This message is from the Pentax-Discuss Mail List. To unsubscribe,
> go to http://www.pdml.net and follow the directions. Don't forget to
> visit the Pentax Users' Gallery at http://pug.komkon.org .
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
