The silk was designed to allow perfect super-imposition, all my library parts should line up very good with 5 mil snap grid for both routing & part placement. Same goes for 0805, 1206, 1210, ect.... Tested in a lot of miniature battery powered equipment, no problems at all.
You can download the lib here: http://www.proteluser.com/showthread.php?t=17
________ Brian G.
----- Original Message ----- From: <[EMAIL PROTECTED]>
To: "Protel EDA Discussion List" <[email protected]>
Sent: Sunday, February 20, 2005 7:30 PM
Subject: Re: [PEDA] how close 0603
I set my 0603's up with a padsize of 32 mil , outline of 28 mil pad centre to
overlay centre and place them using component grid of 8 mil and snap grid of 4
mil. This allows placment so that the overlays can sit on top of its neighbours
overlay exactly and there is 24 thou clearance between pads. Then normal 8/8
routing can be used and a track can go between adjacent 0603 underneath the
overlay with no DRC errors.
Dennis Saputelli <[EMAIL PROTECTED]> on 21/02/2005 05:42:38 AM
Please respond to Protel EDA Discussion List <[email protected]>
To: Protel EDA Discussion List <[email protected]>r cc: (bcc: Clive Broome/sdc)
Subject: Re: [PEDA] how close 0603
how close do y'all pack 0603's side by side ?
Dennis Saputelli
_______________________________________________________________________ Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 2851 21st Street Fax: 415-647-3003 San Francisco, CA 94110 www.integratedcontrolsinc.com
____________________________________________________________ You are subscribed to the PEDA discussion forum
To Post messages: mailto:[email protected]
Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
____________________________________________________________ You are subscribed to the PEDA discussion forum
To Post messages: mailto:[email protected]
Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
____________________________________________________________ You are subscribed to the PEDA discussion forum
To Post messages: mailto:[email protected]
Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
