"Bill" == Bill Janssen <[EMAIL PROTECTED]> writes:
>> - You may write that some values are not zero if you try to read a
>> Plucker DB. For example you say about unused1, unused2, sortInfoId
>> that this _must_ be zero, but if you install this BD and copy this
>> back to the PC its may other valued inside this fields.
Bill> I think this is true for unused1 (LastBackupDate and
Bill> ModificationNumber) and unused2 (uniqueIDSeed), but not for
Bill> SortInfoId, which is directly reserved for the application's use, no?
But IMHO if the Reader of the PluckerDB find a SortInfo Block he
should ignore them and see it not as an wrong DB. The same as with the
AppInfo Block that is also not used by Plucker, but there are no
Problem if this are there.
Bill> I'll change the other two.
>> - You call flag 0x0080 NoBackup, but AFAIK this are Backup. Or i'm
>> wrong here?
Bill> Yes, I got this wrong. 0x0080 is ExcludeFromHotsync, while
It doesn't matter here but to get this right 0x0080 are the "Stram"
Bit.
Bill> 0x0008 is Backup. I'll change this.
OK, fine.
cu,
Dirk
--
Permanent URLs to the latest Version (1.1.11SR1) of the Plucker Windows installer
- For the Webpage: http://www.dirk-heiser.de/plucker
- Direct Download: http://www.dirk-heiser.de/plucker/plucker.exe [2.94MB]
