> -----Original Message-----
> From: fooler [mailto:[EMAIL PROTECTED]]
> Sent: Friday, June 30, 2000 3:14 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [plug] linux flavors
>
>
> ----- Original Message -----
> From: "Ronneil Camara" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, June 30, 2000 02:45 PM
> Subject: RE: [plug] linux flavors
>
>
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> > > Sent: Friday, June 30, 2000 2:18 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: [plug] linux flavors
> > >
> > >
> > > What about the 192.168.0.1 to 254 IP? Do you think they
> can route IP
> > > packets. I think no! The PC which has a live IP address like
> > > 208.160.233.88 can route a packet. Di ba?
> > >
> > > Eto diagram:
> > >
> > > win98 client------->MS NT WS 4.0 proxy------->Internet
> > > 192.168.0.2 192.168.0.1
> > > (dial-up)
> > >
> > >
> > > I'm talking about the above setup. Di ba non-routable ang di
> > > live IP? :)
> > > Parang IP masquerading ng Linux. Clients from the outside
> > > CAN'T use it as
> > > a proxy. While clients inside (i.e. LAN PCs) CAN access it.
> > > Please correct
> > > me if I'm wrong.
> >
> > Yeah, when you talk about Internet, RFC1918 ip addresses becomes
> > non-routable.
> > But still, if you use it for your own WAN, it falls under routed
> protocols.
> > Examples of routed protocols are tcp/ip, ipx/spx and an example of
> > non-routed protocol is netbeui.
> > Examples of routing protocols are rip, bgp, igp, egp, igrp,
> ospf and so
> on.
>
> both of you are still confuse :-> tcp/ip is a routable
> protocol. 10.x.x.x,
> 172.16.x.x and 192.168.x.x are *private* ip addresses. you
> can build your
> own private wan using these *private ip addresses*. read
> carefully what rfc
> 1918 said why these ip addresses *cannot* be use in public wan.
>
Yeah, I believe you, you are totally right. It's actually routed protocol.
This is where tcp/ip and other routable protocol falls. But I am very sure,
you didn't read my POST very well. As I was saying, you can use RFC1918 for
your own WAN.
I did not say, for your public WAN. I guess you have to read this URL.
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/routing.htm
Thanks. I don't say anything.
-
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
