I've searched everywhere but until now i havent fixed
this problem. I've already checked the ide cable and
the connection is ok. ive checked the bios settings
and tried all the options for UDMA;checked for
badblocks and found 5. i though it would be then be ok
but still i lways get this error at startup..
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device
00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on
pci00:11.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings:
hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings:
hdc:pio, hdd:pio
hda: Maxtor 2F040J0, ATA DISK drive
hdb: CD-S520/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 80293248 sectors (41110 MB) w/2048KiB Cache,
CHS=4998/255/63, UDMA(133)
ide-floppy driver 0.99.newide
Partition check:
hda:hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
im running RH8.0. kernel is 2.4.18-14
tia
digest
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
Fully Searchable Archives With Friendly Web Interface at http://marc.free.net.ph
To subscribe to the Linux Newbies' List: send "subscribe" in the body to [EMAIL
PROTECTED]
