On Mon, 5 Mar 2018, Ken Eshelby wrote:
.55.0 network, static ip on laptop - fail - you can try setting the laptop to .1.0 network at this point to see if the .55.0 network is actually configured on the lan side of the router.
Ken, When I change the network on the laptop but the cable is connected to the router the only route is 127.0.0.1. Thus, no connection to the network.
.55.0 network, dhcp ip on laptop - ??? (this step could verify what the router is giving out, possibly implying its "LAN" network settings)
Won't work. My lan uses static IP addressed.
If you're feeling adventurous, there are evidently pins on the system board for a serial connection, but not exposed through the case. Could possibly eliminate some of the guesswork. I would be curious if there are differences between the different eth ports
It's a sealed case and the problem is not the hardware but the way I did things. Thanks, Rich _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
