Rich Shepard(rshep...@appl-ecosys.com)@Mon, Mar 05, 2018 at 08:08:31AM -0800:
> On Mon, 5 Mar 2018, Ken Eshelby wrote:
> > .55.0 network, static ip on laptop - fail
> > - you can try setting the laptop to .1.0 network at this point to see if
> > the .55.0 network is actually configured on the lan side of the router.
> When I change the network on the laptop but the cable is connected to the
> router the only route is 127.0.0.1. Thus, no connection to the network.
If you're statically assigned, you'll need to set a router explicitly.
What happens if you set a gateway of whatever IP you expect the ERX to
have on that port?
PLUG mailing list