"The Modem card never kicks out but the enet card sometimes does. After boot finishes, I just pull the card about 1/2 way out and then push it back in. It is then recognized and I'm back in business."
I had written to the list several weeks ago with a related problem (pc card won't go all the way into the PCMCIA slot) and had gotten some suggestions (use paper clip to try to release a spring in the slot) that haven't panned out. I've been following this thread and wnat to jump in with my problem. Here's my situation; I have a 1400cs with a 166mhz cpu. I 've tried to insert a Farallon ethermac card into both PCMCIA slots but it keeps springing back whenever I try to push it in. Is there some kind of special PCMCIA voodoo to get these cards into their slots? Is it the card or the slot? -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
