yes both of them are same except buffer id , i do this in mininet
On Fri, May 23, 2014 at 2:53 PM, farshad tajedin
<farshad.taje...@gmail.com>wrote:
> yes both of them are same except buffer id , i do this in mininet
>
>
> On Fri, May 23, 2014 at 1:23 PM, Murphy McCauley <
> murphy.mccau...@gmail.com> wrote:
>
>> Are the packet-in messages and their payloads 100% identical?
>>
>> Are you doing this on real hardware, or in Mininet, or... ?
>>
>> -- Murphy
>>
>> On May 22, 2014, at 11:13 PM, farshad tajedin <farshad.taje...@gmail.com>
>> wrote:
>>
>> hi murphy
>> i have a path between two hosts(h1 and h2) in a data center,when i ping
>> h2 from h1 since switches on this path have no flow entry for route icmp
>> packet to h2 , the edge switch that h1 connected to it(e_s1) ,send icmp
>> packet to controller. in controller i handle it and i add flow entry to
>> each switch on this path in my controller code and at last send packet out
>> msg to e_s1 to forward this packet. during this action (ping h2 from h1) i
>> capture traffic of my network by wireshark and i see packet in msg from
>> e_s1 two times sends to controller that i expect packet in msg must send
>> once.
>>
>>
>> On Fri, May 23, 2014 at 4:30 AM, Murphy McCauley <
>> murphy.mccau...@gmail.com> wrote:
>>
>>> I think you'll need to provide a lot more detail.
>>>
>>> Are you saying that you're trying to proactively insert all the rules
>>> into the switch when it connects, but you're getting packet-ins (from table
>>> misses) anyway and you're not expecting them?
>>>
>>> How do packet-outs factor in here?
>>>
>>> -- Murphy
>>>
>>> On May 22, 2014, at 5:45 AM, farshad tajedin <farshad.taje...@gmail.com>
>>> wrote:
>>>
>>> i must say that i use 1.add flow message and 2.packet out message
>>> sequensialy
>>>
>>>
>>> On Thu, May 22, 2014 at 3:17 PM, farshad tajedin <
>>> farshad.taje...@gmail.com> wrote:
>>>
>>>> hi all
>>>>
>>>> i have a fat-tree topology, when i ping a host from another host i
>>>> found that first host 2 times send packet in message to controller and i
>>>> dont know why. can anybody help me ?
>>>>
>>>> P.S i use core.openflow.addListenerByName("ConnectionUp",
>>>> start_switch) for event handling.
>>>>
>>>> --
>>>> Best Regards
>>>>
>>>> Farshad Tajedin
>>>>
>>>
>>>
>>>
>>> --
>>> Best Regards
>>>
>>> Farshad Tajedin
>>>
>>>
>>>
>>
>>
>> --
>> Best Regards
>>
>> Farshad Tajedin
>>
>>
>>
>
>
> --
> Best Regards
>
> Farshad Tajedin
>
--
Best Regards
Farshad Tajedin
