on 02-11-18 14:29, David Townend at [EMAIL PROTECTED] wrote: > > Oh boy, have I been having fun ! I wish I had left well alone. But no, I > just had to do a Fiddle Too Far... > > > If anyone can advise, much appreciated, as always !
Hi David This happened to me a while ago with an Epson 1200, Epson inks and Epson PhotoPaper. The edge of one of the rubber feed rollers on the printer (2nd from the R) kept getting dirty (ink) about 1/4 of the way through the print and I end up with a blotchy black line running the length of it. I did numerous things to try to clean the rollers including all those mentioned; I tried moving the + paper thickness adjustment bar; I visually checked alignment, etc, everything looked fine to me but still kept getting a black line ... I finally called Epson but they had no suggestions other than to send it in for a service ... so in foolish desperation I trimmed off the offending bit of rubber on the roller - guess what? the ink started being transferred onto the previously clean half! In the end I had to send the printer off to be serviced. They replaced the roller and... don't know what else they did but it's worked fine for the last 5 months now. Cost about �40 or so. Maybe you'll be lucky and manage to sort it out yourself! Good luck. Best wishes Tariq TARIQ DAJANI PHOTOGRAPHY +44 (0)7984 980 208 UK +46 (0)73 612 26 64 Sw http://www.tariqdajani.com =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
