Mike, My advice would be to speak to John Read at Marrutt - he's a very helpful guy. I only have experience of using Lyson small gamut inksets but found that the canned profiles from Marrutt gave varying results depending on the type of paper used. In the end I decided to bite the bullet and get my 1160 profiled for Lyson small gamut ink on each of the three different papers I use. No looking back! - the results are perfect and with small gamut I also have the option to produce good sepia, selenium or split-tone images. Udo Machiels of Atmos designs did all my profiling - another really helpful character (Tel: 01342 300839).
Malcolm Jeffs > On 23 August 2004 16:19 Mike Russell wrote: > How do you go about profiling a printer when > you're going to use quad black inks? > > Obviously something like eye-one is going to be a > bit confused if you run out the RGB chart in > black and grey! > > What are people's experiences using the Marrutt > canned profiles with mono prints? =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
