Linda, I think your are perhaps trying to many things all at once. Perhaps you should focus on getting a clean install of 805 on both your machines and be sure that jqt is working properly before tackling JHS.
Also, if both machines are 64bit capable (likely the case) then stick with J64. There is no reason to be messing around with j32 (unless there is something I don't know). On Sun, Mar 12, 2017 at 1:27 PM, Linda A Alvord <[email protected]> wrote: > Bill, I have avoided trying the beta until I know what I can and cannot > do in 805 and j64-805 > > Load 'dissect' is still not ok in 805 > > Linda > > -----Original Message----- > From: Programming [mailto:[email protected]] On > Behalf Of Linda A Alvord > Sent: Sunday, March 12, 2017 6:03 AM > To: [email protected] > Subject: Re: [Jprogramming] JHS update > > A new problem. Yestrerday jhs.bat would give me a console. When I ran > it, I could open Chrome and get to jhs. All temp files were there. > > Today the new (I reinstalled everything) jhs.bat goes Right to explorer > which I don't like. But it does connect to my temp files. So I close it > and connect to Chrome and I no longer get temp files. > > I liked uestereday's version of that much more. > > Linda > > -----Original Message----- > From: Programming [mailto:[email protected]] On > Behalf Of Linda A Alvord > Sent: Sunday, March 12, 2017 5:56 AM > To: [email protected] > Subject: Re: [Jprogramming] JHS update > > Bill I found a better way to get pacman to work. I found the two > versions and then put them on the desktop. TThey can not run as > administrator, but if I then run jqt as an administrator I could install > pacman and use your code to install plot, viewmat, dissect ..l > > > > -----Original Message----- > From: Programming [mailto:[email protected]] On > Behalf Of bill lam > Sent: Sunday, March 12, 2017 4:52 AM > To: [email protected] > Subject: Re: [Jprogramming] JHS update > > "360 sandbox"? Did you mean the chinese made anti-virus software? > If so, I strongly suggest you un-install it immediately. > 360 itself is a virus which kills other virus. > > Вс, 12 мар 2017, Linda A Alvord написал(а): > > Bill, On 32 I tried this and could get pacman past security by putting > it (2 of them) into 360 sandbox. > > > > However I sent a shortcut to the desktop and still couldn't use the icon > and run as an administrator. Can you clear pacman as you have with the > rest of the install. > > > > > > -----Original Message----- > > From: Programming [mailto:[email protected]] On > > Behalf Of bill lam > > Sent: Saturday, March 11, 2017 1:28 AM > > To: [email protected] > > Subject: Re: [Jprogramming] JHS update > > > > Many addons are missing. Try install all addons by > > > > load 'pacman' > > 'install' jpkg 'all' > > > > on both 32 and 64-bit. > > > > Сб, 11 мар 2017, Linda A Alvord написал(а): > > > Eric, Things are much better. I have jhs 32 and 64 working. The temp > files show up under link and it is as I remember it. > > > > > > However, the new problem is both jhs versions have difficulty finding > files but this seems unrelated to my setup. > > > > > > Here are some examples from 32 bit, but there are similar problems > > > in > > > 64 > > > > > > load 'dissect' > > > not found: C:/Users/j805/bin/dissect > > > |file name error: script > > > | 0!:0 y[4!:55<'y' > > > > > > load 'viewmat' > > > not found: c:/users/j805/addons/graphics/viewmat/viewmat.ijs > > > |file name error: script > > > | 0!:0 y[4!:55<'y' > > > > > > load 'plot' > > > not found: c:/users/j805/addons/graphics/plot/plot.ijs > > > |file name error: script > > > | 0!:0 y[4!:55<'y' > > > > > > > > > > > > > > > Thanks for your patience with me! Linda > > > > > > -----Original Message----- > > > From: Programming [mailto:[email protected]] > > > On Behalf Of Eric Iverson > > > Sent: Friday, March 10, 2017 11:38 AM > > > To: Programming forum > > > Subject: Re: [Jprogramming] JHS update > > > > > > Linda, > > > > > > Let's first make sure that the menu ide>file (no s) is working > properly. > > > > > > In the jijx page, click menu ide>file and that should take you to a > page that is a file explorer. That page should have a menu item called > action and then a row of folder names. > > > > > > Try clicking on various folder names to see how the page changes. > > > > > > Click on the temp folder name and you should then see a list of files > in your temp folder. If you see a file there with a name that does not > start with a digitl, double click it to open it in a jijx editing page. > > > > > > The use of a file should add its name to the list of recent files. Go > to the jijx page and do menu ide>jfiles. This will give you a list of files > you have recently accessed in JHS. This list is maintained in the browser > so various actions can clear the list. This is why you are seeing a blank > page. > > > > > > The blank page if there are no recents is confusing. I should perhaps > change it to say something like 'no recent files', or as IBM used to put in > its manuals 'this page intentionally left blank'. > > > > > > > > > > > > > > > > > > On Fri, Mar 10, 2017 at 10:57 AM, 'Pascal Jasmin' via Programming < > [email protected]> wrote: > > > > > > > ide> file ... action>new file > > > > > > > > or just ide> jijs > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: Linda A Alvord <[email protected]> > > > > To: [email protected] > > > > Sent: Friday, March 10, 2017 10:44 AM > > > > Subject: Re: [Jprogramming] JHS update > > > > > > > > Pascal, In jqt you open new temp and then save. > > > > > > > > In JHS, how do you get to a place where you can define a script > > > > and save it? > > > > > > > > Linda > > > > > > > > -----Original Message----- > > > > From: Programming > > > > [mailto:[email protected]] > > > > On Behalf Of 'Pascal Jasmin' via Programming > > > > Sent: Friday, March 10, 2017 9:20 AM > > > > To: [email protected] > > > > Subject: Re: [Jprogramming] JHS update > > > > > > > > seems like you want to save an ijs (script) file? You need to > > > > open one first. The ijx file is like the console in jqt. > > > > > > > > > > > > Eric has mentioned a few times now that "file" menu is different > > > > than "files" menu. > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: Linda A Alvord <[email protected]> > > > > To: [email protected] > > > > Sent: Friday, March 10, 2017 8:41 AM > > > > Subject: Re: [Jprogramming] JHS update > > > > > > > > Also, it seems that there were more choices before. There ar: > > > > > > > > Ide debug tools help > > > > > > > > Weren't there 'action' which included 'save' ? > > > > > > > > Linda > > > > > > > > -----Original Message----- > > > > From: Programming > > > > [mailto:[email protected]] > > > > On Behalf Of Eric Iverson > > > > Sent: Thursday, March 9, 2017 9:28 PM > > > > To: Programming forum > > > > Subject: Re: [Jprogramming] JHS update > > > > > > > > I don't understand your problem report. There has been no change > > > > in JHS other than were they appear in the menu. > > > > > > > > ide>files (note the s) is a list of files you have used recently. > > > > > > > > ide>file (no s) is a file browser. You can navigate over your > > > > ide>folders and > > > > see all your files. > > > > > > > > Please confirm that menu ide>file is working properly. > > > > > > > > Also, please report the result of the expression in JHS: > > > > jpath'~temp' > > > > > > > > And then run the same expression in jqt and report that. > > > > > > > > It sounds like perhaps you multiple installations of J and that is > > > > the source of the confusion. > > > > > > > > > > > > > > > > > > > > On Thu, Mar 9, 2017 at 9:07 PM, Linda A Alvord > > > > <[email protected]> > > > > wrote: > > > > > > > > > In the past, I could access all ijs files in temp when I was > > > > > connected to jhs in my browser. All worked with no problem. > > > > > How can I do that now as '"file" has a new meaning. Otherwise > > > > > all older files must be retyped befo before they can be used and > > > > > modified. Also once they were modivied in jhs they would be > corrected when accessed in jqt. > > > > > > > > > > Linda > > > > > > > > > > -----Original Message----- > > > > > From: Programming > > > > > [mailto:[email protected]] > > > > > On Behalf Of Eric Iverson > > > > > Sent: Thursday, March 9, 2017 2:46 PM > > > > > To: Programming forum > > > > > Subject: [Jprogramming] JHS update > > > > > > > > > > JHS update available. JHS now automatically browses to the jijx > page. > > > > > This is probably more convenient than the current behavior for > > > > > most people most of the time. > > > > > ---------------------------------------------------------------- > > > > > -- > > > > > -- > > > > > -- For information about J forums see > > > > > http://www.jsoftware.com/forums.htm > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------- > > > > > -- > > > > > -- > > > > > -- For information about J forums see > > > > > http://www.jsoftware.com/forums.htm > > > > ------------------------------------------------------------------ > > > > -- > > > > -- For information about J forums see > > > > http://www.jsoftware.com/forums.htm > > > > > > > > ------------------------------------------------------------------ > > > > -- > > > > -- For information about J forums see > > > > http://www.jsoftware.com/forums.htm > > > > ------------------------------------------------------------------ > > > > -- > > > > -- For information about J forums see > > > > http://www.jsoftware.com/forums.htm > > > > > > > > ------------------------------------------------------------------ > > > > -- > > > > -- For information about J forums see > > > > http://www.jsoftware.com/forums.htm > > > > ------------------------------------------------------------------ > > > > -- > > > > -- For information about J forums see > > > > http://www.jsoftware.com/forums.htm > > > > > > > -------------------------------------------------------------------- > > > -- For information about J forums see > > > http://www.jsoftware.com/forums.htm > > > > > > -------------------------------------------------------------------- > > > -- For information about J forums see > > > http://www.jsoftware.com/forums.htm > > > > -- > > regards, > > ==================================================== > > GPG key 1024D/4434BAB3 2008-08-24 > > gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3 gpg --keyserver > > subkeys.pgp.net --armor --export 4434BAB3 > > ---------------------------------------------------------------------- > > For information about J forums see http://www.jsoftware.com/forums.htm > > > > ---------------------------------------------------------------------- > > For information about J forums see http://www.jsoftware.com/forums.htm > > -- > regards, > ==================================================== > GPG key 1024D/4434BAB3 2008-08-24 > gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3 gpg --keyserver > subkeys.pgp.net --armor --export 4434BAB3 > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm > > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm > > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm > > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm > ---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
