Mike,
        the method you tried works, I do it all the time from component part
to component part and from component to component. The only thing that I can
think of (although usually it is only when pasting from component A to
component B) is that you must first click somewhere in the new part window
to shift the focus to that window before doing the paste.

Brad Velander,
Lead PCB Designer,
Norsat International Inc.,
#300 - 4401 Still Creek Dr.,
Burnaby, B.C., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com


> -----Original Message-----
> From: Robison Michael R CNIN [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 15, 2001 7:06 AM
> To: 'Protel EDA Forum'
> Subject: [PEDA] duping parts in a multi-part component ??
> 
> 
> hello,
> 
> i've set up a 6-part component in my component library and i built
> up the first part and now i want to copy this first part into 
> the second
> part and then edit the pin numbers and remove the vcc and gnd, but
> i can't figure out how to copy the first part into the second part.  i
> tried to just drag around the entire first part and do a 
> copy/paste but
> that won't work.
> 
> thank you, miker

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to