Robison Michael R CNIN wrote:
> 
> hello,
> 
> i just finished a board that had an connector with little smt-type
> feet, some that contacted with the top, some that contacted with
> the bottom of the board.  i played with getting a footprint with top
> and bottom pads, but it didn't seem to want to cooperate, so i
> ended up hacking it and splitting the connector into two separate
> connectors in the schematic and assigning separate footprints to
> them and merely displacing the bottom one to the bottom side on
> the pcb itself.

You have to use single-layer pads with no holes - should be no problem.

Look in the standard libraries for edge connectors as examples.

-- 
Peter Bennett
TRIUMF
4004 Wesbrook Mall, Vancouver, BC, Canada      
GPS and NMEA info and programs: 
http://vancouver-webpages.com/peter/index.html

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to