Hi John,

      What kind of software do you use to compare??
      Because when they compare the netlist the designators must be matching
!!!!!


     lin



> -----Original Message-----
> From: Jun Gong [mailto:[EMAIL PROTECTED]]
> Sent: Friday, February 15, 2002 3:44 PM
> To: Protel EDA Forum
> Subject: [PEDA] Designator matching
>
>
> Hi, Everybody,
>
> I have a schematic and a PCB. They are pretty matching except the
> designators. This is caused by manually layout of the PCB. There are
> several repeated and similar zones in PCB, so I just do copy the first
> routed zone to other places.
>
> I compared the 2 netlist files (one generated from PCB, the other from
> schematic) they are matching.
>
> The problem is how can I modify the designators in schematics so that
> the schematic could be the identical to the PCB. There are 500 parts
> involved, so I don't want to do it manually.
>
> Any suggestions?
>
> John
>


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to