Hi, Dwight & Abd, Thank you for the suggestions. Those will be great help to me in the future.
John -----Original Message----- From: Dwight Harm [mailto:[EMAIL PROTECTED]] Sent: Saturday, February 16, 2002 5:31 AM To: Protel EDA Forum Subject: Re: [PEDA] Designator matching If you have a sch page that matches the section you repeated on the PCB, and you followed some pattern in designators, then in sch you can copy the page, then use Tools | Annotate, Advanced tab (I think) to renumber the sch parts in a matching way. Once designators match, do Design | Update PCB to synchronize. > -----Original Message----- > From: Jun Gong > Sent: Friday, February 15, 2002 3:44 PM > > Hi, Everybody, > > I have a schematic and a PCB. They are pretty matching except the > designators. This is caused by manually layout of the PCB. There are > several repeated and similar zones in PCB, so I just do copy the first > routed zone to other places. > > I compared the 2 netlist files (one generated from PCB, the other from > schematic) they are matching. > > The problem is how can I modify the designators in schematics so that > the schematic could be the identical to the PCB. There are 500 parts > involved, so I don't want to do it manually. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
