The only problem is that Protel will add new nets to everything and assigns all routed traces to "No Net" names and you have to reroute these.
-----Original Message----- From: David W. Gulley [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 23, 2002 12:16 PM To: Protel EDA Forum Subject: Re: [PEDA] Netlist Import take too long? I am not positive this is the best way (or even a good way), but what I do is: Design/Netlist Manager/Menu/Clear All Nets just before I do a: Design/Load Nets Note there is a LONG pause before the Load Nets Window comes up (10-15 seconds) but much less than the 25+ I have seen waiting without clearing all nets. David W. Gulley Destiny Designs Michael Biggs wrote: > Does anyone use a third party schematic capture program then import the > netlist each time to Protel99SEsp6? Well I do and it works great always has. > The problem I'm having is that some of the more sophisticated boards netlist > take 10-15 minutes to load each time I need to import a new netlist due to > schematic changes or pin swapping. Does anyone know of a fix for this or a > way to accelerate the netlist import? * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
