Tim, i have done this too and this method does not work for me, at least
not every time on every machine (3 of them total)

i think i will try Wojciech's approach

thank you both for your patience in re-posting this

Dennis Saputelli



Tim Fifield wrote:
> 
> I have created a schematic templates ddb with various .dot files and located
> that in my data directory on the network. I then put the company .jpg in the
> same folder as the schematic templates ddb. In the actual sch template .dot
> file make sure the logo is properly mapped.
> 
> Then when I create a new .sch (in the projects directory) I go to
> Design/Template/Set Template file name, add the .ddb with the .dot template,
> select the template, and hit Ok.  The logo appears every time. Works on all
> the computers that are on the network.
> 
> Tim Fifield
> 
> -----Original Message-----
> From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, June 12, 2002 10:57 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] graphic logo on schem
> 
> can someone tell me again how to get a graphic logo to work consistently
> on a schematic across a network?
> 
> i put a copy of the bmp in the local directory of the project DDB
> also inside the DDB (a desperate move maybe)
> 
> when working on other machines on the network the logo comes and goes
> 
> (when working on other machines the work is done thru mapped drive
> letters)
> 
> if i open the DDB which holds the given .dot template the logo magically
> appears
> 
> on the local machine (the machine on which it was created) this is not
> necessary
> 
> Dennis Saputelli
> 
> ************************************************************************
> * Tracking #: D8DC8BC594B56C41B2D293079AEEC1DFAC0A4595
> *
> ************************************************************************
> --
> ___________________________________________________________________________
> www.integratedcontrolsinc.com            Integrated Controls, Inc.
>    tel: 415-647-0480                        2851 21st Street
>       fax: 415-647-3003                        San Francisco, CA 94110

-- 
___________________________________________________________________________
www.integratedcontrolsinc.com            Integrated Controls, Inc.    
   tel: 415-647-0480                        2851 21st Street          
      fax: 415-647-3003                        San Francisco, CA 94110

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to