If you know how to edit the menus, here is the info for that missing selection:
Text: Export to Database Process: ExportSchematicToDatabase Params: (I left params blank) Stick that in your File/Export menu and it should look normal. > -----Original Message----- > From: Tim Fifield [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, July 24, 2002 9:45 AM > To: Protel EDA Form > Subject: [PEDA] Hot Linking > > > I want to export a schematic to a database so that I can try some hot > linking. The protel handbook (pg. 163) says: "Select File >> Export to > Database to pop up the Export Database dialog." > > But when I select File Export all I get is "AutoCAD DWG/DXF" and > "PCAD 2000 > ASCII". > > Am I missing something? Am I looking in the wrong spot? > > The reason I want to do this is because I have a schematic drawn with > "generic parts" i.e. all resistors have LibRef of "res3". I want to change > the schematics so each component has its own specific LibRef such as > "ERJ-6ENF24R9V". > > Tim Fifield > > > ************************************************************************ > * Tracking #: AFBD0364E0C48B4C8C35978334A6393880320B4B > * > ************************************************************************ > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
