Yes but as I mentioned I have over 40nets and want to add the net classes in a text format so I can do it all at once (like an INI file or the old "place txt" file where you could place components by XY co-ordinates we did that for placing test points in specified locations -- you sure didn't want to do that one at a time. Fran
-----Original Message----- From: Steve Smith [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 30, 2002 9:53 AM To: 'Protel EDA Forum' Subject: Re: [PEDA] Manual edit for adding net classes? Fran, Design > Netlist Manager Select the far left "Add" button. Name your net class and select the nets you wish to add to this new class and hit the arrow key. Regards, Steve Smith Product Engineer Staco Energy Products Co. Web Site: www.stacoenergy.com -----Original Message----- From: Frances Wheeler [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 30, 2002 10:41 AM To: Protel EDA Forum Subject: [PEDA] Manual edit for adding net classes? I have some PCI traces that I want to add the lengths up -- >From the connector to the resistor pin 1 = 1 length (which is critical and has a not to exceed) >From the resistor pin 2 to BGA pin = 2nd length The above to distances must be added together and not to exceed 2.5 inches In the rules I can add a net and a net class together, sooo I wanted to make a bunch of net classes but it's tedious to do one at a time - is there a file I can edit. As the net class is in fact going to be only one net there are over 40 such nets to add up. Any suggestions Fran ************************************************************************ * Tracking #: 7957B880BF5285439BBDF79AB632F21B2BDB4A55 * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
