I haven't looked into it, but I believe this could be done, by saving the pcb to
an ASCII file then editing the text there.

Rob





"Frances Wheeler" <[EMAIL PROTECTED]> on 07/30/2002 11:09:21 AM

Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]>

To:   "'Protel EDA Forum'" <[EMAIL PROTECTED]>
cc:    (bcc: Rob LaMoreaux/DSPT)

Subject:  Re: [PEDA] Manual edit for adding net classes?



Yes but as I mentioned I have over 40nets and want to add the net
classes in a text format so I can do it all at once (like an INI file or
the old "place txt" file where you could place components by XY
co-ordinates we did that for placing test points in specified locations
-- you sure didn't want to do that one at a time.
Fran

-----Original Message-----
From: Steve Smith [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 9:53 AM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Manual edit for adding net classes?


Fran,

Design > Netlist Manager

Select the far left "Add" button.
Name your net class and select the nets
you wish to add to this new class and hit
the arrow key.

Regards,
Steve Smith
Product Engineer
Staco Energy Products Co.
Web Site: www.stacoenergy.com


-----Original Message-----
From: Frances Wheeler [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 10:41 AM
To: Protel EDA Forum
Subject: [PEDA] Manual edit for adding net classes?


I have some PCI traces that I want to add the lengths up --

>From the connector to the resistor pin 1 = 1 length (which is critical
and
has a not to exceed)

>From the resistor pin 2 to BGA pin = 2nd length

The above to distances must be added together and not to exceed 2.5
inches

In the rules I can add a net and a net class together, sooo I wanted to
make
a bunch of net classes but it's tedious to do one at a time - is there a
file I can edit. As the net class is in fact going to be only one net
there
are over 40 such nets to add up.

Any suggestions

Fran


************************************************************************
* Tracking #: 7957B880BF5285439BBDF79AB632F21B2BDB4A55
*
************************************************************************







* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to