because that's the way it is! i get different numbers though i guess it beats getting access violations because some field wasn't expected to be empty
maybe dxp fixes some of these things? Dennis Saputelli Tim Fifield wrote: > > Here's another few questions I've been wondering about for some time. > > Why is it that when I place a Pin (when making a sch symbol for a connector) > the pin name and number start at 8? > > Why is the net of the power ports I place on a schematic the same net name > of the very first power port I ever placed in protel, ever? > > Why is it that when I place a text string in PCB I get the text that I was > using in a completely different .ddB? > > Why is this info being stored and how do I stop it from doing so? Especially > the pin number starting 8. > > -----Original Message----- > From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, July 31, 2002 11:25 PM > To: Protel EDA Forum > Subject: Re: [PEDA] rectangle hole? > > Tim, > > if you use those holes just for the mechanical fixing points, you can create > them by using Fills in the footprint. If you want to plate them through, > there are some PCB manufacturers doing it on request. If you want to create > them as pads, that is not possible. You will have to wait until DXP SE(sixth > edition). > > Igor > > -----Original Message----- > From: Tim Fifield [mailto:[EMAIL PROTECTED]] > Sent: Thursday, 1 August 2002 2:26 AM > To: Protel EDA Form > Subject: [PEDA] rectangle hole? > > I'm creating a connector footprint with two rectangle holes or slots for > mechanical stability. How do I create rectangle holes? > > Tim Fifield > > ************************************************************************ > * Tracking #: F043784119037E49B6F4845F2C828DF67ED2F5AD > * > ************************************************************************ -- ___________________________________________________________________________ www.integratedcontrolsinc.com Integrated Controls, Inc. tel: 415-647-0480 2851 21st Street fax: 415-647-3003 San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *